Feature

●🚘【1 inch WHEEL SPACER 6X4.5】The 6x4.5 WHEEL SPACERS with Thickenss:1" or 25mm;Inner Diameter:66.1mm;Vehicle Bolt Pattern:6x4.5 or 6x114.3mm;Wheel Bolt Pattern:6x4.5 or 6x114.3mm;Thread Pinch:12x1.25;Outer Diameter(5.905 inch).
●🚘【WHEEL SPACER 6X4.5to 6x4.5 -Super Durable】The body of wheel adapters 6x4.5 1 inch is made of Forged aluminum.Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength
●🚘【WHEEL SPACER 6X4.5 TO 6X4.5 Bennefit】The hub centric wheel spacers 6 lug Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability
●🚘【1 INCH SPACER About the thickness】 For the 1 inch wheel spacers 6 lug Please confirm about the Fender Gap (shown in the left picture),this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap. For example,if your fender gap is 1",It is better to choose spacers which is less than 1" thick
●🚘【HUB CENTRIC WHEEL SPACER 6X4.5】Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing

Description

fitments

2005-2014 for Frontier wheel spacers
2005-2014 for Pathfinder wheel spacers
2005-2014 for Xterra wheel spacers

fit for

M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length
M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length
M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length
M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length
1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length

If your factory thread size is different Need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation

Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:

1) Shorten the factory studs

2) The wheels need to have the open slots (cavities) between mounting holes.

3) Purchase a set of shorter studs and replace them with the factory studs.