Feature(may vary by option.)

●Wire Thread Inserts: Thread Size: 7/16-14 UNC; Nominal Length: 2.5D; Overall Length: 21.5mm / 0.85"; Type: Helical. Great for thread repair and maintenance work.
●304 Stainless Steel: Made of 304 stainless steel, it has good corrosion resistance, rust resistance and excellent oxidation resistance. 304 stainless steel is one of the most widely used chromium-nickel stainless steels, with wear resistance, high hardness.
●Wide Applications: Widely used in mechanical equipment, construction machinery and other equipment that need thread repair. The helical thread insert is not easy to slip, with deep and clear thread, no deformation.
●Features: Designed with a certain of elastic, and provides an even load on the thread. It is resistant to vibration. Greatly improve the strength of the screw connection and prolong the service life of the equipment.
●Easy to Lock: The locking type wire thread insert can easily lock the screw into the threaded hole. The screw does not loosen when subjected to shock and vibration, better than the general locking device. It is wear-resistant when disassembled frequently, increasing the thread life.

[1  & 2-13 UNC]




[1  & 4-20 UNC]




[7  & 16-14 UNC]




[3  & 8-16 UNC]




[5  & 8-11 UNC]





Description

11

Wire Thread Inserts

304 Stainless Steel

It has good corrosion resistance, rust resistance and excellent oxidation resistance. 304 stainless steel is one of the most widely used chromium-nickel stainless steels, with wear resistance, high hardness.

Easy to Lock

The locking type wire thread insert can easily lock the screw into the threaded hole. The screw does not loosen when subjected to shock and vibration, better than the general locking device.

Features

  • Designed with a certain of elastic, and provides an even load on the thread.
  • Greatly improve the strength of the screw connection and prolong the service life of the equipment.
  • It is wear-resistant when disassembled frequently, increasing the thread life.
11

Wide Applications

Widely used in mechanical equipment, construction machinery and other equipment that need thread repair. The helical thread insert is not easy to slip, with deep and clear thread, no deformation. Great for thread repair and maintenance work.

Instructions

1. Use the drill bit ( NOT included) to drill holes; 2. Tap the drilled holes with the tap ( NOT included); 3.Put the thread insert into the T-slot on installation tool ( NOT included); 4. Screw set into the screw hole with T-handle installation tool ( NOT included); 5.Use the breaking pin tool ( NOT included) to break the crossbar on the thread Inserts; 6. Thread is repaired and ready to use.