Feature

●Electronic kits: reverse protection diode, protect equipment and test equipment are not damaged in emergency situation.
●Strain gauge: voltage output: a gauge bending test sensor module can sending voltage output.
●Miniature kit: the analogs signals it outputs directly can be directly read and processed the next- levels equipment.
●Strain gauge kit: long working span life: more than 10 million times, than other similar products.
●Bending sensor: analog output, the direct output analog signal can be read and processed directly by the next level device.


Description

Package List
1 x Strain gauge Bending detection Test Sensor Module

Features
- Fatigue life:> 10 million times sfp module
- The analog output voltage: 0- sensor.
- Size: 3 x 1.5cm 1kg weight sensor module.
- Board size: 32 X 17 mm acid- base neutralization experiment
- Resistance: 350 Ohm transducer
- Other Feature: Bending Sensor
- Voltage: 5V module charge amplifier
- Note:Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm inverters.
- Flux: Ordinary solder light sensor
- Material: modified phenolic substrates strain gauge module.
- Strain : 2% load cell sensor
Color: As Shown light dependent resistor.
Reverse protection diode culler strain gauge
- Reverse protection diode, protect equipment and test equipment are not damaged in emergency situation bending test.
- Long Fatigue life, more than 10 million times, longer than other similar products sensor module kit for.
Analog Output load cell amplifier
Zero potentiometer Bending Detection

Goods Description
Bending Sensor Working principle of resistance strain gauge is based on the strain effect produced when a conductor or semiconductor material that is mechanical deformation under the action of external forces, the resistance value of the corresponding changes.Strain Gauge Amplifier The strain gauges attached to the object to be measured so as to be measured strain was bent together, so that the inside of the metal foil as the strain on the bend.miniature kit Many metal during mechanical bending resistance will change