This is a modal window.
This is a modal window.
This is a modal window.
This is a modal window.
This is a modal window.
This is a modal window.
Can it clean inclined walls, floor slopes, sundecks (reflection pool) or steps?
The TANK X1C pool robot cleans all kinds of pool floor, walls and waterline. But it is unsuitable to clean pool steps, or inclined walls/floor slope > 25°. Neither is it designed to clean sundeck/reflection pool where water depth is less than 1.64ft.
What it the maximum cleaning area of the robot? How long does it take to get my pool cleaned?
On a full charge, the swimming pool robot can clean as large pool surface as 2500 ft², with work time up to 2.5 hours. The cleaning efficiency is 1140 ft² per hour.
What does the S and F beside the switch stand for? Is there a quick cleaning option?
The device has two cleaning modes for you to select according to your time schedule and pool cleanliness.
S-mode: full clean (walls+waterline+floor)
F-mode: quick clean (floor-only)
What should I do if the device stops running and the red lights on both sides are on?
It indicates "Cleaning Needed". Its suggested that you inspect the rollers and treads of the robot for obstruction (e.g. gravel, a loose screw), rinse with a water hose, or remove the treads for thorough cleaning.
Why doesnt the robot climb walls?
1. Make sure the battery has sufficient power (no less than 70%).
2. Please select S mode before cleaning.
3. Walls too slippery such as glass, metal, and wet large tiles, will make it impossible for the robot to climb the wall.
Up to 2500 sq.ft | Pool Size | Up to 4100 sq.ft |
Over 150 minutes | Runtime | Over 210 minutes |
2.5 hours | Charging Time | 3.5 hours |
3 | Number of Motors | 3 |
| Waterline Scrubbing | |
| Wall Cleaning | |
| Floor Cleaning | |
Up to 2500 sq.ft | Pool Size | Up to 4100 sq.ft |
Over 150 minutes | Runtime | Over 210 minutes |
2.5 hours | Charging Time | 3.5 hours |
3 | Number of Motors | 3 |
| Waterline Scrubbing | |
| Wall Cleaning | |
| Floor Cleaning | |