[8X16 ]
[7x14 ]
[8X32 ]
This is a modal window.
8x24inch WM210V | 7x12inch WM180V | 8X32inch WM210V | 8X16inch WM210V | 7x14inch Mini Lathe | |
Customer Reviews
|
4.8 out of 5 stars
8
|
4.8 out of 5 stars
8
|
4.8 out of 5 stars
8
|
4.8 out of 5 stars
8
|
4.8 out of 5 stars
8
|
Price
| — | — | $1,344.25$1,344.25 | $1,025.00$1,025.00 | $899.00$899.00 |
Brushless Motor Power
| 1100W | 600W | 900W | 900W | 750W |
Spindle Bore
| 1.50"(38mm) | 0.83"(21mm) | 1.50"(38mm) | 1.50"(38mm) | 1.26"(32mm) |
Centers Distance
| 23.6"(600mm) | 11.8"(300mm) | 31.5"(800mm) | 15.7"(400mm) | 13.78"(350mm) |
Swing Over Bed
| 8.3"(210mm) | 7"(180mm) | 8.3"(210mm) | 8.3"(210mm) | 7.09"(180mm) |
Chuck Diameter
| 4.92"(125mm) | 3.94"(100mm) | 4.92"(125mm) | 4.92"(125mm) | 3.94"(100mm) |
Range of Metric Threads
| 0.5-3mm | 0.3-3mm | 0.5-3mm | 0.5-3mm | 0.5-2.5mm |
Spindle Taper
| MT5 | MT3 | MT5 | MT5 | MT3 |
Lathe sizes
| 38.2"X11.8"X13.4" | 27.9"X11.8"X13.0" | 45.7"X13.0"X13.4" | 31.9"X11.8"X13.8" | 29.9"X9.4"X12.0" |
Spindle rotation speed
| 50-2500rpm | 50-2500rpm | 50-2500rpm | 50-2500rpm | 0-2250RPM |
Voltage
| AC110V | AC110V | AC110V | AC110V | AC110V |
Digital display of rotation speed with more accurate adjustment, it is more convenient to operate.
High-Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly.
Equipped with metal gear, metal lathe has strong power, and more accurate transmission.
Spindle speed is divided into high and low two gears:50-1250rpm/m and 1250-2500 rpm/m.
The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools.
Precise dials are provided on the saddle handle, the tailstock handle and the movable center, allowing for more accurate and professional work.
Forward and reverse switch and with emergency stop switch. In case of emergency can stop immediately, it is safer.
With MT2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation.
Be sure to clean the antirust oil before,cause the chuck to be stuck and not move,or even burn out the motorMiniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies.For turning inside and outside cylindrical surface,cone surface,ring groove and forming turning surface,turning end face and all kinds of commonly used metric thread,cone surface,ring groove and forming turning surface,turning end face and all kinds of commonly used metric thread.