Feature(may vary by option.)
●Measures 10.03 mm x 5.08 mm x 15.75 mm long with a 1/4-20 thread
●25 Series compatible
●Made out of 1215 steel with a black zinc finish
●Comes with a rubber flex handle to better position and move within the t-slot
[500]
[10]
Description
Steel Roll-In T-Nut with Flex Handle Hardware
The roll-in T-nut with flex handle is a fastening option that loads from the profile ends or side, which is helpful for applications where the ends are inaccessible. The flex handle sticks out past the profile to make it easy to position and move within the T-slot.
|
|
|
|
|
|---|---|---|---|
|
Roll-in t-nuts allows installation on a closed end - you can "roll" these t-nuts in anywhere on the t-slot of an extrusion. |
Commonly used with a bolt to secure brackets and plates to the t-slot of an aluminum extrusion. |
Comes in a wide variety of series, sizes, threads, finishes, and self-aligning options. |
No machining required when using a t-nut and a bolt to mount corner brackets and joining plates. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3376 T-Nut 80/20 Hardware | 3283 T-Nut 80/20 Hardware | 3602 T-Nut 80/20 Hardware | 3782 T-Nut 80/20 Hardware | 25-1956 T-Nut 80/20 Hardware | 40-3282 T-Nut 80/20 Hardware | |
| Series | 10 Series | 15 Series | 15 Series | 15 Series | 25 Series | 40 Series |
| Thread Size | 1/4-20 | 1/4-20 | 1/4-20 | 5/16-18 | M5 | 5/16-18 |
| Finish | Black Zinc | Black Zinc | Stainless Steel | Bright Zinc | Bright Zinc | Black Zinc |
| Self-Aligning | No | No | No | No | No | No |
Applications
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
