Feature(may vary by option.)
●20-piece package of Closed 6-Spline aftermarket lug nuts. These steel alloy lug nuts are cold-forged and heat-treated to ensure strength, performance, and durability. Machine-precision 1/2"x20 threads ensure a snug fit onto vehicles studs. Coating undergoes salt spray testing to ensure extra protection from rust/corrosion.
●Compatible with Ford 1992-2011 Crown Victoria, 1977-1988 Thunderbird, 1964-2014 Mustang. Compatible with Ford 1992-1996 Bronco, 1984-1990 Bronco II. Compatible with Ford 1992-2006 E-150 Econoline, 1991-2019 Explorer, 2001-2010 Explorer Sport Trac. Compatible with Ford F-150 (1992-1996), 1960-1979 Ranchero, 1983-2012 Ranger. Compatible with Dodge 1965-1977 Monaco, 1987-1990 Dakota, 2007-2012 Nitro, 1994-2001 Ram 1500. NOTE: Vehicle Must Have 1/2"-20 1/2x20 1/2"x20 Studs.
●Total Length: 1.40 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Black | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. See Diagram for Measurements.
●[Safety and Installation] Wheel hardware is an important safety component. Ensure these lugnuts are the proper size (length & width) before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. Youll also need a 19mm (3/4") Hex Socket Key Tool.
●These 1/2-20 lug nuts are not an oem or genuine OE part, but are compatible with various Ford, Dodge, Lincoln 5Lug vehicles. We are confident youll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings.
[Chrome Silver]
[Black]
Description
Specifications
- Thread Pitch: 1/2"x20
- Nut Height: 1.40 inches
- Hex Size: Spline
- Style: Long Spline, Closed end
- Seat Type: 60 degree Cone/Conical / Acorn/Taper
- Color: Black
- Material: Cold Forged Steel
20pcs Black Spline Drive Lug Nuts - 1/2x20 Threads - 1.4 inch Length - Closed End - Cone Acorn Taper Seat - Includes 1 Socket Key Tool
Adding Style & Security
Features:
- 6-splined nut for added security.
- Using the included key, can use any 19mm or 21mm socket to for installation and removal.
- Made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance.
- Triple coating provides the ultimate in corrosion, rust and scratch resistance.
- Machined with precision to ensure a perfect fit every time.
- Fits on 4-Lug and 5-Lug vehicles with 1/2"-20 Thread Pitch wheel studs.
- Contains a 20 Pack of Long Spline, Closed End Lug Nuts.
- Compatible with various Ford, Dodge, and Lincoln vehicles.
- Verify the year/make/model of your vehicle in fitment chart below.
Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts to the nuts you are currently using.
- These lug nuts are designed to pair with 60 degree cone / taper / acorn seat wheels ONLY.
- Cone seat is also commonly referred to as conical, taper, or acorn seat.
- Ball seat and shank/mag style lug seats are NOT compatible with these lug nuts.
- Check your vehicles wheel stud length. Wheel stud MUST NOT be longer than 38mm (1.5inches")
- Your vehicle MUST have 1/2"-20 Threaded Studs
- Failure to verify this can cause the nuts to bottom out, preventing the wheel from securely properly onto the hub, potentially causing accident and/or injury
Check your wheel lug hole diameter. The included socket key outer diameter is roughly 25mm (1.0 inch), therefore, please ensure your vehicles lug hole must be larger than 25mm (1").