TAB Install Step 1 After establishing TAB elevation and orientation, use the 13/16” Auger Bit supplied in the Tree Fort Install Kit to drill a level hole 8-3/4” into solid wood (excluding bark). *Minimum Recommended Tree Diameter ~10"
|
TAB Install Step 2 Using the Forstner/Custom Pilot Bit supplied in the Tree Fort Install Kit, drill 3” into solid wood (excluding bark). *Be sure to clean the bit and hole often, as woodchips will build up quickly.
|
TAB Install Step 3 Clean out sawdust by blowing through a piece of tubing or using compressed air. Verify that your 13/16” hole is a full 5-3/4” deep.
|
TAB Install Step 4 Screw in the TF TAB until the boss is seated.
|