Note:
1. After putting it in the microwave oven, adjust the power level to the minimum position. After heating for 25 seconds, touch the pressure plate with your hand. If it is not hot, increase the power level to continue heating for 25 seconds and then check;
If it is not very hot, continue to increase the power level to gear and heat for 25 seconds; until you touch the pressure plate and feel hot, keep this power level;
Use this power to heat for 25 seconds, take out the plants and wait for them to cool before putting them in a microwave oven to heat them, and repeat until the plants are dry.
Attention:
1. Please do not use high heat for a long time. That will make the temperature too high, and burn the plants, lining cloth, and the felt pad.
2. It is better to limit the single heating time and increase the heating times. Drying is done in multiple short bursts, instead of one long burst. If the part is too hot, wait for the part to cool before bursting.
3. When using a microwave oven with a higher power, please reduce the single heating time, Drying times are dependent on the wattage of the microwave and the moisture content of each flower.