Feature
●👍The thermostat controller board length is 14cm and the width is 7cm. Digital Thermostat kit is more compatible for Pit Boss pellet grills PB700,340,440,820.
●👍Adjustable temperature, stepless temperature adjustment, temperature range can be set by yourself. Eight Cook Temperature Settings (200 to 475 degrees).
●👍Three Different Models: The thermostat controller board has three models, smoke mode, temperature mode and high mode.
●👍An easy-to-read LCD display shows the exact cooking temperature inside your grill.
●👍Package Included: 1*Thermostat Controller Board, 1*Temperature Probe, 1*Ignitor, 1*Meat Probe, 1*Fuse, 5*fixing band.
Description
WADEO Replacement Parts for Pit Boss Pellet Grills Digital Temperature Control Panel Kit
- Fits Pit Boss pellet grills PB700,340,440,820.
- Good quality : High quality PCBA & High quality aluminum knob for switching models and adjusting temperatures.
- Easy installation : Standard plug-in connectors & Plug and play.
- LCD Display : Clear and bright.
- A Probe Monitoring : monitor the temperature in real time.
- Different Models : It has [smoke mode] and [temperature modes] from 200 ℉ to 475 ℉, [High mode] can be used for highest heat possible.
Installation Instructions:
- Step1 - Remove 8 phillips Screws
- Step2 - Clip plastic fastener On cables
- Step3 - Pull apart plastic molex pins
- Step4 - Remove 2 Screws from panel
- Step5 - Loosen and slip wires from clamps
- Step6 - Replace with new Controller
- Step7 - Slip wires back Into box and tighten
- Step8 - Plug molex connectors In the same order
- Step9 - Push Controller into place
- Step10 - Tighten Screws On Controller face
- Step11 - Tuck wires back Inside case
- Step12 - Fasten bottom grate with Screws
- 1*Thermostat Controller Board
- 1*Temperature Probe
- 1*Ignitor
- 1*Meat Probe
- 1*Fuse
- 5*fixing band
|
|
|
|
|---|---|---|
RTD Temperature Probe |
Hot Rod Ignitor |
Meat Probe |
|
|
|
|
|---|---|---|
|
|
|
|
