Feature(may vary by option.)

●Thread Size: M4-0.7mm; Thread Pitch:0.7mm; Thread Type: Coarse Thread, Full Thread
●Head Diameter: 8.7mm (min)-9.3mm(max); Nut Height: 10.5mm
●Rivet nut is a tubular rivet with internal threads. Typically used when the material is too thin to machine the thread.
●Blind rivet nut is used when the application has little or no access to the backside as they can be installed from the front side of the work piece.
●Material: 304 Stainless Steel 18-8 that you will probably see in your house or workplace. Its used for a wide variety of home and commercial applications. Because of its slightly higher strength and wear resistance than type 316, its also used for nuts, bolts, screws and other fasteners.

[M10-1.5 x 21mm]





Description

22
dd

304 Hex Flange Nuts

Serrated flange washer head

Rivet nut is a tubular rivet with internal threads. Typically used when the material is too thin to machine the thread.

Use a nut that is consistent with your other fasteners.

Application

They are commonly used for machinery and construction projects because of its sturdy structure. Its very suitable for applications with relatively large locking forces. Ideal used in indoor or outdoor projects.

Notice

  • Please refer to the specification of the linked product for the specific size
  • Please purchase the appropriate size according to your needs

33

77

55

Wide Application

Widely used where fastening is required, the assembly and maintenance of households and workplace, machine tools, construction, ships, communication equipments, and other DIY projects.

High Quality Material

The hardware sets are all made of high quality 18/8 stainless steel 304 which shows great strength and corrosion & oxidation resistance in bad environments like high & low temperature. That makes them ideal material choice in both indoor and outdoor projects.

Many Options to choose

Bolts, screws, nuts, washers, rivets, nails, pins, anchors, stables, threaded inserts.

Both US and Metric Standard.

One Stop Hardware-Shop!

44

Stainless Steel 304

Composition

304 (A2) is the most extensively used austenitic stainless-steel. Its also known as stainless steel 18/8 which is derived from the nominal composition of 18% chromium and 8% nickel.

Thanks to the chromium content, 304 stainless steel products show excellent corrosion and oxidation resistance.

Weakness

304 Stainless Steel is more likely to corrode from saline environments in coastal areas. That means grade 316 stainless steel is highly recommended for tough applications under the marine environment where there is more powerful acids and chemicals.

Application

  • Hardware (Bolts, Screws, Nuts, Washers and etc.)
  • Sanitaryware
  • Chemical Equipment
  • Machinery
  • Engineering
  • Architectural panelling
5 5 2 2 4 4
Hex Locknuts by Inch Hex Locknuts by Metric Flange Nuts by Inch Flange Nuts by Metric Acorn Nut by Inch Acorn Nut by Metric
Thread Size #4,#6,#8,#10,1/4,5/16,3/8,7/16,1/2,5/8,3/4 M3,M4,M5,M6,M8,M10,M12,M14,M16,M20 #4,#6,#8,#10,1/4,5/16,3/8,7/16,1/2,5/8,3/4 M3,M4,M5,M6,M8,M10,M12,M14,M16,M20 #4,#6,#8,#10,1/4,5/16,3/8,7/16,1/2,5/8,3/4 M3,M4,M5,M6,M8,M10,M12,M14,M16,M20
Material 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel
Drive Type Hex Drive Hex Drive Hex Drive Hex Drive Hex Drive Hex Drive
1 1 1 172 2 02
Hex Nut by Inch Hex Nut by Metric Hex Bolt by Inch Button Socket Cap Screws by Inch Hex Washer Self Drilling Screws Pan Head Self Tapping Screws
Thread SIze #4,#6,#8,#10,1/4,5/16,3/8,7/16,1/2,5/8,3/4 M3,M4,M5,M6,M8,M10,M12,M14,M16,M20 1/4,5/16,3/8,1/2 1/4,5/16,3/8 #8,#10,#12,#14 #4,#6,#8,#10,#12,#14
Screw Length 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel 410 Stainless Steel 304 Stainless Steel
Drive Size Hex Drive Hex Drive Hex Drive Hex Drive Hex Drive Phillips Drive