Easy to adjust settings
As a rule of thumb, start with a shade that is too dark to see the weld zone. Then, go to a lighter shade which gives a sufficient view of the weld zone without going below the minimum.
- Grinding Mode: Set the switch to Grind, the lens will stay on shade 4, will not be activated by any arc.
WARNING: Switch "Weld" mode to avoid accidental flashes.
- Shade Adjustment: First set the SHADE RANGE using the range selector switch, "5-9" or "9-13", then use the Shade dial to set the desired shade numbers.
5-8 is great for some low amp application and small current plasma cutting jobs.
- Delay Control: Dark to Clear Delay, to avoid glow flashes from the hot bead. Turn clockwise, the delay time will be increased.
- Sensitivity Control: Controls how sensitive the sensors are responding to welding arc. Proper setting can avoid false triggering from adjacent arc while ensures auto darkening when needed. Turn clockwise, the sensitivity will be increased. Set the sensitivity highest, and decrease if there false triggering exists.
- All internal settings is great for people who need to work in limited spaces