Feature

●【Material】 Self tapping thread insert is made of high quality carbon steel.
●【Easy to Install】 Self tapping thread inserts has self-tapping ability, does not need to be pre-tapped, can be directly used by the installation tool to screw it into a specific hole.
●【Easy Maintenance】 Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss.
●【Good Character】 Self tapping thread insert is not easy to slick, deep thread, uniform force, no burr in thread.
●【Application】Mainly used for furniture repair, automotive industry, rail vehicle industry, household appliance and other industries.


Description

50 pcs Self-Tapping Threaded Inserts Combination Set

thread inserts thread insert m8 metal insertthread inserts thread insert m8 metal insert

Slotted Threaded Inserts M3 M4 M5 M6 M8 M10 M12

self-tapping thread insert self-tapping steel insert m8self-tapping thread insert self-tapping steel insert m8

The package includes:

  • 10 x M3 * 0.5 thread insert
  • 10 x M4 * 0.7 thread insert
  • 10 x M5 * 0.8 thread insert
  • 5 x M6 * 1.0 thread insert
  • 5 x M8 * 1.25 thread insert
  • 5 x M10 * 1.5 thread insert
  • 5 x thread insert M12 * 1.75

Characteristics:

Material: SUS303, SUS316, carbon steel
Quantity 50pcs
Weight: Approx. 192 g
The package includes: 50pcs Self-Tapping Thread Inserts Combination Set
self-tapping insert steel thread insertself-tapping insert steel thread insert

  • This self-tapping thread insert has a cutting slot on the head of the threaded sleeve, with high strength and wear resistant threads. The cutting groove has the characteristics of self-tapping, ease of transfer, high impact resistance and anti-drop performance
  • Self-tapping inserts do not need to be tapped in advance. They can be screwed directly into the special holes reserved by the base material with an installation tool, which is economical and beautiful. They can also increase wire strength for new products, which are used throughout the metal and plastics processing industry.

thread insert self-tapping insert m6 self-tapping insert threaded insert for metalthread insert self-tapping insert m6 self-tapping insert threaded insert for metal

Self-Tapping Threaded Insert Installation Method

  • Method 1:
  • When the number of installations is small, the simple installation method can be adopted. More precisely, the method of corresponding specification bolts + nuts is adopted, and the self-tapping screw sleeve is attached to the corresponding screw, and the same type of nut is used to fix it, to make the three into one whole, use a wrench to screw the screw sleeve into the bottom hole, then remove the screw.
  • Method 2:
  • 1. Make a hole. Depending on the material of the part, select the hole diameter range.
  • 2. With the slotted end or the three-hole end facing down, install the self-tapping screw sleeve on the front end of the tool and press it vertically against the workpiece, turn the wrench to lock it. turn in the lower hole.
  • 3. After inserting it into the specified position, fix the hex part of the tool with a clamping plate, and then reverse the wrench to separate the tool from the workpiece.