Feature

●perimeter 300mm, hole diameter 6mm, thick
●Power supply :5-26V DC
●min measuring unit:1mm
●The output waveform is proportional to the unit of international measurement type(Meter or inch)


Description

Description

Suitable for measuring the length or speed of target moving successively by wheel type,such as textile measuring ,printing measuring, Plastic Machinery etc .

Power supply: 5-26V
Shaft diameter: 8mm
Wheel perimeter :200mm
Encoder Body diameter: 38mm
Cable length: 1 meter
Pulse: 200P/R
Output: NPN open collector output with ABZ 3 signals
Output wave form: Square wave
Maximum shaft speed: 6000 rpm
Protection: IP54
Current consumption: ~150 mA
Maximum pulse: 100 KHz
Weight: about 0.25kg
Operating humidity: 30 to 85% without frost

Connection:
Red=VCC, Black = 0V, Green = A, White = B, Yellow = Z
Note: If the encoder is not connected to the device can not be directly oscilloscope oscilloscope (open collector output without pull-up resistor when there is no voltage output) If you want the oscilloscope in AB two-phase output with two pull-up resistors.