Feature(may vary by option.)

●【12V 60W Oil Extractor Pump】Included: 1 x Pump; 1 x Outlet Hose(thick); 1 x Inlet Hose(thin); 2 x Hose Clamps; 2 x Battery Clamps; Ideal for Motorcycles, Cars, Quads, Truck, Boat, Forklift, Generator, Tractor, Scooter and Other 12v Vehicles.
●【Specification】: Oil Diesel extractor pumps Voltage: DC12, Maximum current: 5A, Maximum power: 60W. Perfect for quick and easy oil changes that you can do at home.
●【Quick and Clean】Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore. Simple On/Off Power Switch, easy to use.
●【Note】This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. But please note that NOT suitable for extracting water, gearbox oil or flammable liquids(such as fuel, petrol, gasoline). Also please be noted not to mistake the direction of the inlet and outlet hose, the incorrect installation would lead to the not-working of the oil pump.
●【Easy to Use】You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. Ideal Equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore.

[Red]




[Yellow]





Description

BANNERBANNER
How to use oil change pumpHow to use oil change pump

Some Trouble-shooting:

Oil pump does not work:

1. The pump doesnt work after being turned on. Check and found the current value of battery is lower than 15V --- Please change the battery and ensure the current value is above 15V.

2. The extracted oil is not heated, which is viscous and cannot be pumped, leading to the not-working of the oil pump --- Please warm up the engine to the temperature between 40~60℃ to reduce the oil viscosity.

Oil Pump Stops Working:

1. The extracted oil is not heated, so it is viscous. Although it can be pumped, the inlet pipe is thin and the oil pipe is inner blocked, resulting in current overload and the pump cannot work --- Please warm up the Warm up the engine to the temperature between 40~60℃ before pumping out.

2. The inlet and outlet oil pipes are installed in reverse, so the oil cannot be discharged in time, causing the pump cannot work--- Please insert the hose in a correct order

3. The oil pump is used to extract the low flash point oil such as gasoline with no lubricating effect, water, or other corrosive liquids, the impeller of the oil pump would be damaged and pump stops working --- Please do not use this pump to extract water, gearbox oil or flammable liquids (such as fuel, petrol, gasoline)

OIL CHANGE PUMPOIL CHANGE PUMP
Oil Diesel Fluid PumpOil Diesel Fluid Pump

Oil Change Pump Extractor

Extracting motor oil from your vehicle without Mess & Specialised.

It can be used for your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc.

WARNING: This product can not use to extract water, gearbox oil or flammable liquids(such as fuel, petrol, gasoline)

If the product have any problems, well give you a free-return.

Specificaiton：

  • Input Voltage: DC 12V
  • Wattage: 60W, Current: 5A
  • Motor Oil (40-60 degrees)
  • Flow Rate: approx. 1L / min
  • Diesel or heating oil: approx 250 L/H
  • Sound pressure level:70dB(A)

Battery ClampsBattery Clamps

Oil ExtractorOil Extractor

Clean and TidyClean and Tidy

Package IncludedPackage Included

Battery Clamps

  • Black for Cathode
  • Red for Anode
  • Changing the polarity of the power supply will change the direction of oil discharge

Easily Connect

  • Please connect it correctly, otherwise it is easy to malfunction.
  • It is mainly used to extract waste gas from the car, not to refuel.

Warm Tips

  • We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.
  • Clean this pump after use, you can flush with washing detergent and then run with fresh transmission oil to run out water/detergent.

Package Included

  • 1 x Pump
  • 1 x Outlet Hose
  • 1 x Inlet Hose
  • 2 x Hose Clamps
  • 2 x Battery Clamps
  • 1 x User Guide
HOW TO USEHOW TO USE

Easy Operation:

  1. Warm up the engine for about 5 minutes to reduce the oil viscosity. Its important that the engine oil is warm (not hot) when extracting.
  2. Turn off the engine and loosen the filler cap (for the time being)
  3. Connect the power clip of the pump body directly to the battery
  4. Remove the oil level gauge and insert the thin hose of the pump. (Notice if you put it to the innermost very quickly,it wont work)
  5. Gradually insert the hose while operating the pump.
  6. When it is inserted to some extent,the operating noise will change and the oil will start to be sucked up.
  7. Put the thick discharge hose on the waste oil tray. (If you put it directly in the waste oil treatment box, you will not know the amount of waste oil collected.)

B08XYP8LGK 80W 12V Oil Change Pump Extractor B08KZQPX23 Oil Change Pump Extractor 12V 60W WT-0081
Oil Change Pump Extractor Oil Diesel Fluid Pump Extractor Oil Change Pump Extractor
See Details
Customer Reviews
4.1 out of 5 stars
179
4.0 out of 5 stars
952
4.1 out of 5 stars
179
Price — $21.99 $22.59
Specification 80W 12V 60W 12V 60W 12V
Color Yellow Red Red