How to Use:
1. Start the engine and let it reach 100°F
2. Turn off the engine and wait for 5 minutes for oil to drain
3. Place pump near engine, remove oil dipstick, and check oil level
4. Find a container for used oil and attach exhaust hose
5. Insert thin hose into oil dipstick hole and connect pump to car battery
6. Turn on pump and monitor process, wearing protective eyewear
7. Pumping out 5 quarts takes 5 minutes; turn off pump when complete
8. Disconnect hoses and wires, replace oil filter if needed
9. Refill engine with appropriate oil amount using the pump case table
10. Store kit in a safe place.