Feature(may vary by option.)
●Measures 13.5 mm x 7.2 mm x 22 mm long with a M8 thread and a ball spring
●15, 40 Series compatible
●Made out of 1045 steel with a bright zinc finish
●Self aligning with a ball spring to better position and hold within the t-slot
[500]
[10]
Description
Steel Roll-In T-Nut with Ball Spring Hardware
The roll-in T-nut with ball spring is a fastening option that loads from the profile ends or side, which is helpful for applications where the ends are inaccessible. The ball spring holds the T-nut in the T-slot, even when the profile is in a vertical position, simplifying the assembly process.
|
|
|
|
|
|---|---|---|---|
|
Roll-in t-nuts allows installation on a closed end - you can "roll" these t-nuts in anywhere on the t-slot of an extrusion. |
Commonly used with a bolt to secure brackets and plates to the t-slot of an aluminum extrusion. |
Comes in a wide variety of series, sizes, threads, finishes, and self-aligning options. |
No machining required when using a t-nut and a bolt to mount corner brackets and joining plates. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3923 T-Nut 80/20 Hardware | 3917 T-Nut 80/20 Hardware | 13082 T-Nut 80/20 Hardware | 13029 T-Nut 80/20 Hardware | 13021 T-Nut 80/20 Hardware | 40-3915 T-Nut 80/20 Hardware | |
| Series | 10 Series | 15 Series | 20 Series | 15 and 40 Series | 15 and 40 Series | 40 Series |
| Thread Size | 1/4-20 | 5/16-18 | M3 x 0.5 | M5 | 5/16-18 | M8 |
| Finish | Bright Zinc | Bright Zinc | Bright Zinc | Stainless Steel | Stainless Steel | Bright Zinc |
| Self-Aligning | No | No | Yes | Yes | No | No |
Applications
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
