Feature(may vary by option.)

●This listing features for 1 set LED Tail Lights Assembly Kit in smoke lens, compatible with 1997-2006 Wrangler TJ tail lights, 1976-1986 CJ7 tail lights, 1981-1985 CJ8 tail lights, 1987-1995 Wrangler YJ tail lights and 1976-1983 CJ5 tail lights. Both Driver and Passenger Side are included. NOTE:NOT PLUG AND PLAY, AND SOME MODIFICATIONS MAY NEED;
●This red rear combination tail lights kit feature 16 large brake, parking and directional LEDs, 6 license plate light LEDs, 21 brilliant white Back-Up LEDs and 3 side reflector light LEDs; Smoke Lens will make your truck more noticable; NOTE: These tail lights assembly are LEDs ones and stock lights with incandescent system may causes flashes, you may need a resistors(NOT INCLUDED);
●These real tail lights assembly are a ideal replacement for your stock tail lights. Wiring tips: White is ground, blue wire is for backup reverse light, black wire is for tail/license plate light/side marker light and red wire is for stop turn brake light. NOTE: THE WIRING MAY NOT THE SAME AS YOUR STOCK LIGHTS,PLEASE CHECK IT BEFORE YOU BUY,THANKS;
●Come and replace your dim factory tail lights with our brilliant LED tail lights assemblies and get eye-catching; Note: Our rear square tail lights is NOT PLUG AND PLAY, it is bolt in your replacement tail lights and bolt distance is 2" approx.; Cutting of the stock tail lamp pigtail is required and must be spliced onto the new assembly with included hardware. Of Course, removable lens;
●Warranty: We will offer 1 YEAR WARRANTY for rear led tail lights assembly since you place the order. Please feel free to send us email if theres any issue before or after purchase and we will reply in 24 hours;

[Red Lens]




[Smoke Lens]





Description

rear combination tail lights lamps smokedrear combination tail lights lamps smoked

Pair (2 Pieces, Left + Right) of Rear Tail Lights Assembly Upgrade Kit(with Mounting screws, bolts and nuts included)

Fit following vehicles:

Replacement for 1976-1983 CJ5 tail lights lamps assembly;

Replacement for 1976-1986 CJ7 tail lights lamps assembly;

Replacement for 1981-1985 CJ8 tail lights lamps assembly;

Replacement for 1987-1995 Wrangler YJ tail lights lamps assembly;

Replacement for 1997-2006 Wrangler TJ tail lights lamps assembly;

Features:

-- Color: Smoke Lens

-- Dimension: 6.75" x 5.75" x 2.35"

-- Rear Square Led Combination Stop Turn Tail Light Stud Mount Lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed.

-- Each one is equiped with 46 Super bright LEDs: 16 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 3 red led as side marker lights, and 6 White LED as License Plate illuminator(left side)

-- Replacement part number: Left Side: 56018649, 56018649AD, 56016721, CH2800120, CH2800161; Right Side: 56018648, 56018648AD, 56016720, CH2801120, CH2801161

Installation: The red lens is removable. Mounting Bolts and Nuts are included for complete mounting; These rear combination tail lights are bolt in replacement tail lights and bolt directly in place of your stock led tail lamps. You may need to cut off the stock tail lamp pigtail and spliced onto the new assembly with included hardware. Note:the distance between the mounting blots is about 2"~2.2";

Package include: 2x Smoked Red/White LED Stud Mount Combination Stop/Turn/Tail Lights

side marker lightsside marker lights

license plate illuminationlicense plate illumination

rear combination stop turn tail lightsrear combination stop turn tail lights

side marker lights

Both the driver and passenger side rear truck tail lights has side marker lights integrated;

license plate lights

The drivers side rear square taillight illuminate the license plate below(clear portion on the bottom for the tag);

rear combination tail lights lamps

Inatalltion Steps:

1. Before you begin installation, Disconnect the power and put on safety glasses. remove 4 screws;

2. Remove tail light lens;

3. Remove the 3 socket headed screws that attach the taillight to the body of your truck using an about 3/8” socket;

4. Gently pull the light housing away from the body;

5. Unplug the taillight harness from your vehicle wiring harness. You may need to cut off the stock tail lamp pigtail and spliced onto the new assembly with included hardware. Once determined, wire your new LED tail light and Repeat steps 1 through 4 for the opposite side;

Product information