Feature(may vary by option.)
●[ How to connect wires ? ] Connect to +9-32VDC; 2- Connect to Ground(-); 3- Connect to Signal Input; 4- Not Connected; 5- Blacklight(+9-32VDC)
●[ How to install it ? ] Open a hole in the panel (Dimension -85mm / 3 3/8", Depth-2-3/4") , Then put the gauge in the hole and screw down.
●[ Work Signal ] Tachometer sometimes cannot get signal by ignition system. Please make sure you have a speed sensor on your motorcycle. Note: If your speed sensor is installed on the flying wheel panel, the RPM ratio is equal to the number of gears of the engine;
●[ Widely used ] Suitable for all cars, tractors, vans, vessels, boats, yachts, etc. IP67 Waterproof.
●[ Warranty ] 1 Year Warranty. Contact us for after-sales service at any time in a year .
[Silver]
[White]
[Black]
Description
DunkTeam Digital Tachometer Gauge
Features:
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min))
- Backlight: Red -Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc. -Fits for all kinds of tacho sensors, and display the rotation speed of the engine.
-Indicating Range: 0-8000RPM.
WIDELY USE
Package Includes:
1x Tachometer
1x Installation Instruction
|
|
|
|
|
|
|---|---|---|---|---|---|
| Water Level Gauge | Fuel Level Gauge | Volt Meter | GPS Speedometer | Hour Meter | |
|
|
|||||
| Customer Reviews |
4
|
43
|
20
|
10
|
19
|
| Price | — | $13.56 | $13.85 | $66.58 | $21.85 |
| Signal | 0-190 ohm | 0-190 ohm | |||
| Diameter | 52mm | 52mm | 52mm | 85mm | 52mm |
| Backlight | Red | Red | Red | 7 Color | 7 Color |