Qty 10: 1 1/4" 1.25 inch Flush Mount Black Plastic Body and Sheet Metal Hole Plug | For ID1 1/4" - For Panel Thickness 0.03"-0.08" | Head Diameter 1 5/8" | Overall Height 1/4" These plugs are Made for use in sheet metal or similar type material up to .080" thick or approximately 1/16" thick these plugs will for a properly sized hole 1.25" OR 31.75mm plugs with flush-type heads can be used for plugging holes in equipment made of sheet metal, such as automobile bodies, tanks, refrigeration units, etc. NOT RECOMMENDED FOR PIGGY BANKS. Can be snapped into holes easily Held in place by a bead until deliberately removed Material: Low-density polyethylene (BPF-5mm, BPF-6mm, BPF-1/4-4 and BPF-11/32 is EVA material) Service Temperature: LDPE: -94 - 175° F (-70 - 79° C) | EVA: -90 - 140° F (-68 - 60° C) Color: Black