Feature
●Turning Bending Scrolling Fork -- Fits in a 1 inch Hardy hole in an anvil or can be used in a vise. Perfect for making larger "S" hooks, bending medium stock, and most any scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer or bending wrench.
●Creasing Tool Stake -- Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Perfect for making repeatable work consistent such as knife making, leaf, armour.
●Hot Cut Tool -- Used in the anvil or clamped in a vise to cut hot metal. Use a hammer to push the metal through the cutting tool. Cut most of the way through, then break the piece off to prevent flying hot metal.
●Bottom Fuller – Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation.
●Superior Quality-- Hardy is made from A36 Steel, the Fork and the Fuller is made from (1018) cold rolled pennsylvania steel. Providing a higher degree of strength and durability.
Description
Main Information:
-- Fits in a 1 inch Hardy hole in an anvil or can be used in a vise.
-- High standard steel providing a higher degree of strength and durability.
-- Square shanks fit the square hole in the anvil and prevent rotation.
Superior Quality:
- Hot Cut Hardy Tool -- Made from A36 Steel.
- Blacksmith Anvil Bottom Fuller Tool-- Hardy is A36 And The Fuller Is 1018 Steel.
- Turning Bending Scrolling Fork -- Hardy Is A36 Steel And The Fork Is 1018 Steel.
- Creasing Stake Forge Anvil Tool-- Hardy is made from A36 Steel, and the crease is made from 1018 Steel.
Features:
|
|
|
|
|
|---|---|---|---|
Blacksmith Anvil Hardy Bottom Fuller
|
Blacksmith Anvil Hardy Hot Cut Tool
|
Blacksmith Anvil Hardy Turning Bending Scrolling Fork
|
Blacksmith Anvil Hardy Creasing Tool Stake
|
