AA-DUCT AD1 is a single component epoxy, formulated with pure silver power combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. AA-DUCT AD1 shows slight settling when stored for a long period of time, no caking and will re disperse to a smooth homogeneous state. AA-DUCT AD1 formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others. AA-DUCT AD1 designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, wave-guides, electronic modules, flat cable, static shielding, connections, and circuitry. GENERAL PROPERTIES: Appearance Silver Cure Type Heat cure Benefits High strength Perfect bond EMI & RFI shielding Wave guides Substrates Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. UNCURED PROPERTIES: Viscosity At 25 °C cps 6,800 Density gm/cc 2.35 Silver , % 65-75 Density gm/cc 2.35 Pot Life 6 months At 25 °C 9 months At refrigerated CURE SCHEDULE 0.7 hours At 175 °C 1.5 hours At 150 °C 2 hours At 120 °C MISC PROPERTIES: Hardness, Shore D 83 Sheet Resistivity 10-12 m?/sq Lap shear strength 2000 Lb/in2 GENERAL INFORMATION: This product contains organic solvent. The following precautions should be exercised Use with adequate ventilation. Avoid prolonged contact with skin, if contact with skin occurs, wash area immediately with a soap and water avoid prolonged breathing of vapor. Dangerous if swallowed. Refer to MSDS for more details. AVAILABILITY: This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information.