STEP 1: REMOVE LOOSE PIECES
The broken mirror is to remain in the backing plate. Remove loose or protruding pieces with a putty knife or screwdriver.
STEP 2: TEST FIT
Dry fit (test fit) mirror replacement by placing over existing broken mirror to check proper fit. Be sure to align signal etching.
STEP 3: CLEAN
For proper adhesion, make sure surfaces are clean and free of dirt or debris
STEP 4: APPLY ADHESIVE
Apply Burco Redi Stick adhesive patches to the broken mirror or mirror replacement. Use care not to cover signal laser etching
TIP: Install in a warm/dry environment.
TIP: In addition to adhesive patches, you may use silicone or urethane for a secure hold.
STEP 5: INSTALL
Align and press mirror replacement to the broken mirror with firm yet gentle pressure. Make sure to align signal etching.
STEP 6: CLEAN UP
Clean your installed Redi-Cuts mirror replacement with glass cleaner