Feature

●Package Includes: (3) Pair of RockvilIe RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) RockvilIe RXM-S6 Marine/Boat 2600 Watt 6 Channel Amplifier + PA Microphone. (1)RockvilIe RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2)RockvilIe MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin. (1) RockvilIe RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote. Includes: Pair of 6.5" Marine LED Speakers
●16.4 feet of Speaker Wire. Stainless Steel Mounting Screws. Black and White Grills Included. Pair RockvilIe RKL65MBW 6.5 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LEDs flash to the rhythm of the music. You can select either red or blue color LEDs on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire
●The louder the music the more intense the LEDs flash. Black and White detachable Grills. Fully Marinized Against Salt & Fresh Water Conditions. Sun Light Treated cone makes this completely Waterproof and rustproof. Anti-corrosion Stainless Steel Terminals. Molded ABS plastic for amazing sound and protection from the elements while out on the water. Polypropylene Formed Cone. 10 Oz Y30 top of the line magnet supports high power handling. Rubber Surround. High quality ferrite magnet
●1 inch Polymer Tweeter. Oversized 1 CCAW Kapton Voice Coil. Pre-installed Stainless-Steel mounting screws included. Perfect for Marine, Car, ATV and UTV applications. Impedance: 4-Ohm. Frequency Response: 35Hz - 20KHz. Sound Pressure Level: 90dB @ 1w/1m. Total Diameter: 7.3. Cutout Diameter: 5.6. Total Height: 3.86. Mounting Depth: 2.56. Includes: Amplifier. PA Microphone. Bass Remote. Mounting Screws. RockvilIe RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 1300w RMS
●CEA Compliant Power Ratings: 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD. 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD. RMS Power Ratings 1300 Watts (6 x 220 Watts RMS) @ 2 ohms 1300 Watts (3 x 440 Watts RMS) @ 4 ohm Bridged 780 Watts (6 x 130 Watts RMS) @ 4 ohms


Description

(6) Rockville RKL65MBW 6.5" 700w Marine LED Speakers+Receiver+Amplifier+Amp Kit

11

Package Includes:

  • (3) Pair of Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles
  • (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  • (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

_________________________________________________________________________________________________________________________________________________________________

Features of RKL65MBW:

  • Pair Rockville RKL65MBW 6.5” 2-Way 700 Watt Marine Boat Speakers with LED Lights
  • CEA Compliant Power Ratings
  • Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker
  • Total Power: 700 Watts
  • Beat sync LED’s flash to the rhythm of the music
  • You can select either red or blue color LED’s on the wire harness
  • No extra installation for the LED. It gets a power signal through your speaker wire
  • The louder the music the more intense the LED’s flash
  • Black and White detachable Grills
  • Fully Marinized Against Salt & Fresh Water Conditions
  • UV treated cone makes this completely Waterproof and rustproof
  • Anti-corrosion Stainless Steel Terminals
  • Molded ABS plastic for amazing sound and protection from the elements while out on the water
  • Polypropylene Formed Cone
  • 10 Oz Y30 top of the line magnet supports high power handling
  • Rubber Surround
  • High quality ferrite magnet
  • 1” inch Polymer Tweeter
  • Oversized 1” CCAW Kapton Voice Coil
  • Pre-installed Stainless-Steel mounting screws included
  • Perfect for Marine, Car, ATV and UTV applications
  • Impedance: 4-Ohm
  • Frequency Response: 35Hz - 20KHz
  • Sound Pressure Level: 90dB @ 1w/1m
  • Total Diameter: 7.3”
  • Cutout Diameter: 5.6”
  • Total Height: 3.86”
  • Mounting Depth: 2.56”

_________________________________________________________________________________________________________________________________________________________________

Features of RXM-S6:

  • Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
  • High-Speed MOSFET Power Supply
  • Studio-Grade Bipolar Output Stage Transistors
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • CH 1 - 6
  • Low Pass 50Hz - 250Hz
  • High Pass 50Hz - 250Hz
  • Full IC-Controlled Protection Circuitry
  • Fully Adjustable Bass Equalization Control
  • 2 Ohm Stable Stereo
  • 4 Ohm Mono Bridgeable
  • 3 Channel Mixed-Mono Capable@ 4 Ohm
  • 2 CH / 4 CH/ 6 CHInput Mode Selector
  • Mute and Delay Soft Start System
  • Remote Dashboard Subwoofer Control
  • 8 Volt Preamp Circuitry
  • ELNA Brand Audiophile Quality Capacitors
  • Status Mode LED Indicator
  • Frequency Response: 10Hz - 40KHz
  • Minimum THD at Rated Power: < 0.05%
  • S / N Ratio: > 100dB
  • Damping Factor: > 200 @ 100Hz
  • Dual 60 Amp Maxi Fuses
  • Dimensions: (W x H x L) 8.6" x 2"x 16.1".

_________________________________________________________________________________________________________________________________________________________________

Features of RMWK4 V2:

  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25’ Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties

_________________________________________________________________________________________________________________________________________________________________

Features of RGHR2:

  • Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
  • Fits into a standard Gauge-Hole (Tachometer) Opening
  • Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
  • Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
  • IP66 Waterproof Certification (Tested to withstand the elements)
  • USB Input to play back audio files store on a USB thumb drive or any other USB device
  • RCA Aux Input
  • AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
  • Bluetooth built in to stream audio from any Bluetooth enabled device
  • USB Input Charges Your Phone
  • Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
  • Big easy to use buttons
  • Backlit LCD display
  • Wired Remote Control Included (normally 50)
  • Required cutout: 3.72" (diameter) x 2.75" (depth)
  • USB is 500mA and 5V and supports 16GB max
  • Dimensions:
  • 3.72” inch cutout mounting diameter
  • 4.45” inch diameter top plate
  • 2.75” mounting depth (not including top plate)
  • 3.91 inch depth included the top plate
  • Specs of the built in amplifier:
  • TDA7851L quadbridge power amplifier
  • 4 x 72 watts peak @ 2 ohm
  • 4 x 48 watts peak @ 4 ohms
  • 4 x 28 watts RMS @ 4 ohms
  • Highly efficient even when running at 2 ohms!
  • Low distortion even at top volumes

Product information