Feature(may vary by option.)

●Workable for all popular powder fastening systems and single pin Concrete Nailers.
●Ballistic point and smooth shank makes the penetrating easier and lower defect rate.
●Special treated pins are so tough they can penetrate dense concrete, masonry joint or structural quality steel. Plated surface makes the pins durable and suitable for treated lumber.
●1-1/4" Pins with a .300” Head diameter, .145” Shank diameter and .315” diameter flute.
●Pin preassembled to a 15 gauge 45°angle clip. Particularly used for for suspending ceilings and other overhead applications. 100pcs per pack.

[45° Angle Clip]




[90° Angle Clip]





Description

Powder Actuated Fasteners Specification

Point Type Ballistic Point
Shank Type Smooth
Material Carbon Steel
Head Diameter .300"
Shank Diameter .145"
Length 1-1/4"
Surface Treatment Zinc Plated
Heat Treatment HRC52-57
Accessory 15 Guage Ceiling Angel Clip
Application Concrete/Masonry Joints/Steel by Powder Fastener

Applications

Wood to ConcreteWood to Concrete

Fastening Wood to Concrete

When fastening into concrete always maintain a minimum 3" spacing between fastenings and 3" from any free edge. Penetration into concrete should always be 1" minimum. The concrete thickness should be at least 3 times the penetration depth.

Wood to SteelWood to Steel

Fastening Wood to Steel

When fastening into steel always maintain a minimum 1-1/2" spacing between fasten ings and 1/2" from any free edge. Fastener length should be long enough to penetrate the steel completely for maximum holding power. Steel thickness is limited to 3/16" to 5/16".

Metal to Concrete A+ PMetal to Concrete A+ P

Thin Gauge Metal to Concrete or Masonry Walls

When fastening into concrete always maintain a minimum 3" spacing between fastenings and 3" from any free edge. Penetration into concrete should always be 1" Min. The concrete thickness should be at least 3 times the penetration depth.

When fastening into masonry, shoot into horizontal joints only.

Steel to SteelSteel to Steel

Fastening Steel to Steel

When fastening into steel always maintain a minimum 1-1/2" spacing between fasten ings and 1/2" from any free edge. Fastener length should be long enough to penetrate the steel completely for maximum holding power. Steel thickness is limited to 3/16" to 5/16".

FVSCM POWDER ACTUATED FASTENERS FAMILY-WITH ACCESSORY

Powder actuated fasteners with Ceiling clip

1-1/4" with 90°Angle Clip

Powder actuated fasteners with ceiling clip

1-1/4" with 45°Angle Clip

Powder actuated fasteners, Top hat pin

3/4" with Top Hat

powder actuated fasteners with washers

3/4" With Washer

Customer Reviews
5.0 out of 5 stars
3
5.0 out of 5 stars
3
5.0 out of 5 stars
1
Price
$33.24 $30.99 $10.99 $14.99
Shank Length
1-1/4" 1-1/4" 3/4" 3/4"
Accessory
90° Ceiling Angle Clip 45° Ceiling Angle Clip Top Hat 3/4" Washer
Package
100 100 100 100
Powder Fastening system
Power Framing Nailers

FVSCM POWDER ACTUATED FASTENERS FAMILY-WASHERED PINS

Powder actuated fasteners

1" Washered Drive Pin

powder actuated fasteners with washers

3/4" Washered Drive Pin

powder actuated fasteners

1-1/4" Washered Drive Pin

Powder actuated fasteners

1-1/2" Washered Drive Pin

Powder actuated fasteners

2" Washered Drive Pin

PW250

2-1/2" Washered Drive Pin

powder actuated fasteners

3" Washered Drive Pin

Customer Reviews
4.4 out of 5 stars
56
5.0 out of 5 stars
1
4.4 out of 5 stars
56
4.4 out of 5 stars
56
4.4 out of 5 stars
56
4.4 out of 5 stars
56
4.4 out of 5 stars
56
Price
$13.99 $14.99 $16.19 $18.99 $18.99 $18.89 $21.99
Shank Length
1" 3/4" 1-1/4" 1-1/2" 2" 2-1/2" 3"
Washer
1" 3/4" 1" 1" 1" 1" 1"
Package
100 100 100 100 100 100 100
Powder Fastening system
Power Framing Nailers

FVSCM POWDER ACTUATED FASTENERS FAMILY-DRIVE PINS

Powder actuated fasteners

2-1/2" Drive Pin

powder actuated fasteners

3/4" Drive Pin

Powder actuated fasteners

1" Drive Pin

Powder actuated fasteners

1-1/4" Drive Pin

Powder actuated fasteners

1-1/2" Drive Pin

Powder actuated fasteners

2" Drive Pin

Powder Actuated Fasteners

3" Drive Pin

Customer Reviews
4.3 out of 5 stars
53
4.3 out of 5 stars
53
4.3 out of 5 stars
53
4.3 out of 5 stars
53
4.3 out of 5 stars
53
4.3 out of 5 stars
53
Price
$14.24 $9.49 $6.99 $10.44 $10.79 $13.99 $14.39
Shank Length
2-1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3"
Washered
Package
100 100 100 100 100 100 100
Powder Fastening system
Power Framing Nailers
Video Player is loading.
Current Time 0:00
Duration 0:21
Loaded: 61.17%
Stream Type LIVE
Remaining Time 0:21
 
1x

How to use Powder Actuated Fasteners


This is showing how to use.

One must be licensed to use a powder actuated tool.


From the brand