Upgrading to a Nitrous Holeshot torque converter with a higher stall speed can give you better acceleration from a dead stop. It allows the engine to launch the car at a higher RPM, where more torque and power are available. This can be especially important if other modifications (like larger cams) have reduced your low end power and torque. The Nitrous Holeshot 2400 has a stall speed of 2300-2500 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM), so it is best suited for mild to serious performance applications. In addition to better launch capability, the Nitrous Holeshot also provides more strength, including the addition of an anti-balloon plate that allows this converter to stand up to the instant horsepower nitrous delivers. The impeller and turbine are furnace brazed, and many of the components are brand new, including the precision steel alloy pump drive tube, the heavy duty needle bearing between the stator and impeller (not a thrust washer), the turbine hub, and the springs and rollers in the stator. Please Note: High stall torque converters can build extra heat, so supplementary transmission cooling is recommended to avoid premature transmission failure. Also, this converter should not be used with a transbrake.