Feature

●【Updated Version】Update from V1.0 to V1.1 version, add the POGO pins for power supply (New production batch no screws installation issue)
●【Compatibility】Raspberry Pi 5 PCIe Bottom HAT only for Raspberry Pi 5 SBC, match metal case refer to P580 (ASIN: B0CTGXVLL6)
●【M.2 Key-M NVMe SSD Supported】Compatible with M.2 Key-M NVMe SSD 2280/2260/2242/2230 length (SSD is not included, and not reserve column nut to fix 2260/2242/2230 length SSD)
●【How to Power】Can power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP7WPZZY)
●【Packing List】1 x X1002 PCIe Peripheral Board, 1x Screws Pack Accessories (Note: the Raspberry Pi 5, SSD, power adapter is not included)
●【Cooling Solution】Support Raspberry Pi 5 official Active Cooler installation
●【SSD Capacity& Compatibility Note】The X1001 hardware has no limit on NVME SSD capacity, which is depend on the Raspberry Pi OS. Do not recommend to use NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility, refer to Geekworn WiKi for more details!


Description

X1002X1002

Troubleshooting Steps

  1. Check the hardware connection, make sure the FFC cable is fully inserted with right direction. (Change FFC cable to test if you have one.)
  2. Update EEPROM firmware: Check and upgrade the bootloader firmware to the latest version(2024-02-16);
  3. Refer to Geekworm X1002 WiKi to check the SSD incompatibility List, change SSD to test.
  4. Enable PCIe: Must make sure to enable PCIe in the OS on the NVME SSD you are booting, instead of the OS on SD card. Too many people just enable PCIe in the OS on the SD CARD.
  5. Set NVME boot order;
  6. DONT enable PCIe 3.0, ONLY PCIe 2.0 is supported by Raspberry Pi fundation.
  7. If your SSD is old and has a DOS partition, delete the DOS partition and repartition the SSD (feedback from buyer)
  8. Refer to the guide on Geekworm Wiki for more specific operations!!!(wiki.geekworm.com/NVMe_SSD_boot_with_the_Raspberry_Pi_5)

Note: The Raspberry Pi 5, M.2 NVME SSD, SD card is not included in the packing list.

Overview

The X1002 shield is a NVMe M.2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIe interface of the Raspberry Pi 5 to utilise the NVME M2 SSD for fast data transfers and ultra-fast booting.

User Manual: wiki.geekworm.com/X1002

Features

  • Model: X1002
  • Full compatible with other HAT shield;
  • Customized FPC cable for easy use of TF card
  • Supports installation of official active coolers for heat dissipation;
  • With STATUS LED Indicator;
  • Supports 2230/2242/2260/2280 NVME M.2 Key-M SSD.
  • Can power the X1002 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
  • Add POGO pins to provide extra power during large data transfer

PS:

  1. Maximum current for PCIe wire is 1A, and voltage is 5V.
  2. The X1002 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS.

Packing List

  • 1 x X1002 PCIe Peripheral Bottom Shield
  • 1 x PCIe FFC cable
  • 4 x M2.5x5mm F/F Spacers
  • 4 x M2.5x10mm Screws
  • 1 x M2x4mm Screws (to fix NVMe M2 SSD)

X1000 X1001 X1002 X1003
X1000 X1001 X1002 X1003
Customer Reviews
4.0 out of 5 stars
21
4.3 out of 5 stars
109
3.4 out of 5 stars
54
3.6 out of 5 stars
31
Price $15.00 $15.00 $17.50 $15.00
Compatible with Raspberry Pi 5 Raspberry Pi 5 Raspberry Pi 5 Raspberry Pi 5&Official Active Cooler
Mounting Position Top Top Bottom Top
M.2 NVMe SSD 2230/2242 2230/2242/2260/2280 2230/2242/2260/2280 2230/2242
Matching Case P579(ASIN:B0CRD7XQCK) P579(ASIN:B0CRD7XQCK) P580(ASIN:B0CTGXVLL6) P579(ASIN:B0CRD7XQCK) or Official Raspberry Pi 5 ABS Case

Whats in the box

  • 1 x X1002 PCIe Peripheral Board with Accessories