[2USBC 3USB3.0 2USB2.0]
[7 USB3.0]
|
|
|
---|---|---|
High SpeedsGet your time back. Impressive USB 3.0 performance means no more waiting for data to transfer. |
Stable Power SupplyRealizing fast and interference-free data and power transmissions via a SATA power connection. |
Operating SystemsWindows 10/ 8/ 7/ XP/ Vista etc. Backwards compatible with USB 2.0 and 1x devices. |
Here’s a cost-effective solution for adding USB 3.0 connectivity to your computer. When multiple devices are connected, traditional single bus USB 3.0 cards share your maximum bandwidth between all ports.
Note: Each port of the PCI-E card delivers 5W(5V/1A) power max. Devices, which require more than 5W power, may not be compatible with this USB expansion card.
Concerning the included SATA power cable, it has two female ends, one end is for the PCIe usb 3.0 card, and the other ends, this for your devices (such as hard drive).
Note:
1. Please connect the SATA power cable tightly.
2. Use the 15-Pin SATA power cable, not the 4-pin SATA power cable.
3. If you have enough 15-Pin SATA power cable for your device another end is not required, you can just use one end for the usb PCIe card, and then plug in the SATA connector to the power supply.
|
|
|
|
---|---|---|---|
Step 1:Shut down the PC, unplug the power supply and remove the PC case. |
Step 2:Connect the included SATA power cable in the correct direction. |
Step 3:Find the corresponding PCI-E interface, push the card down and tighten the screws. |
Step 4:Close the PC case cover, plug in the power supply, turn on the PC and install the driver, then restart the PC. |
● We do not provide technical support for Mac, Linux and Oculus sensors.
● Not support PCI slot, only work with PCI Express x1 slot and versions above.
● The actual transmission speed of the PCIe USB 3.0 card may be limited by the connected device.
● Install the driver after the PC recognizes the USB expansion card, otherwise, the installed driver will be invalid.
● If the SATA power cable or the PCIe card is not connected properly, your PC may not automatically recognize the PCIe card.
● It is not recommended to connect the supplied SATA 15-pin cable to an external power source, it may cause a short circuit in the PC.
● We suggest that not plug in several high-power devices (such as a webcam, microphone, etc.) at the same time, it maybe occurs failures.
● The included driver CD is only available for Windows 7. If you need any help while installing the driver, please contact our after-sales service.
Attention:
Tiergrade PCI Express Expansion Card allows you to add seven SuperSpeed USB 3.0 ports to your PC to achieve maximum productivity.
This card provides easier access to commonly-used peripherals and features two internal USB ports that let you connect devices inside your computer case securely.
Specifications:
Chipset: VIA VL805 + VL813
Version: PCI Express 2.0
Data transfer rate: Up to 5Gbps
USB power output: Up to 900mA
System Requirements:
1. Plug and Play on Windows 10/ 8.1/ 8 (32/64bit) system.
2. Need to install the driver on Windows XP/ Vista/ 7 (32/64bit) system.
3. SATA power connection is required.
You Must Know:
1. Do NOT install this PCI-E card when the computer is on.
2. We suggest that you use wired equipment to prevent signal interference.
3. Please find the part number at the edge of the card when registering the PCI-E card.
4. To ensure the PCI-E card works properly, please connect it to your PCs power supply first.
5. If your power supply has enough 15-Pin SATA power cables, it is recommended to use your own instead of the included SATA cable.
6. It is recommended that you uncheck the option of "Allow the computer to turn off this device to save power" in the "Device Manager" of your PC when using the expansion card (perform the same operation for each "USB ROOT HUB").
7. The PCIe USB 3.0 card may not be compatible with some USB 3.0 computer host controllers, and here are two requirements of the host controllers: The host baffle has reserved ports; The host controllers width> 4.73 inches.