One Person Job: Have you ever wished you could bleed your brakes without relying on your overly talkative, not so mechanical neighbor Bob, because everyone else was “busy”? With the AGM Brake Pressure Bleeder, you can! No need to wait around until a friend is available, as this easy-to-use system lets you take control of the brake bleeding process by yourself.
Constant Pressure: The AGM Brake Pressure Bleeder works with your air compressors to ensure you have the pressure you need to get the job done efficiently and without accidentally letting air into your brake system.
Works with ABS & Traction Control: Your vehicle is equipped with ABS or traction control you say. No problem, our pressure bleeder is up to the task. Its a versatile tool designed to meet the needs of various vehicles.
We include a FREE Catch Bottle, Syringe, and Filler Cap Wrench with your purchase of the AGM Brake Pressure Bleeder.
|
|
|
---|---|---|
Step 1Fill with the correct brake fluid for your vehicle |
Step 2Connect to Air Compressor and Vehicle |
Step 3Slowly open ball valve until gauge reads 10psi. Now bleed your brakes. |
Pressure bleeding is an easy one-person job where you attach a bleeder to the brake fluid reservoir and push old fluid and air out of the braking system and into a container that’s part of the pressure bleeder kit.
There’s no waiting for the fluid to flow out on its own (gravity), no stop-and-start with another person and no need pull vacuum that never seems to work correctly. There’s also very little cleanup time involved. The pressure method with a kit is by far the quickest, easiest and cleanest approach to bleeding your brakes.
|
|
|
|
---|---|---|---|
Ball Valve to Control AirBy simply hooking your airline to the brake bleeder and slowly rotating the green handle, your bleeder will pressurize and be ready to go |
Built In Pressure RegulatorThe built-in pressure regulator will take your shop air @ 110 psi or whatever its set at and regulate it down to 10spi to make sure the brake bleeder works perfect every time. |
Standard Industrial Air FittingInstead of special fittings that force you to buy our caps, we use standard industrial air fittings you can buy anywhere. This allows you to build caps and adapters for whatever you need to pressurize. |
Included Air Pressure GuageThe built in gauge lets you make sure you are operating in the correct pressure range. from 8-12 psi, the brake bleeder will make the job very quick and simple. |