[Red]
[Bracket-Blue]
[Bracket-Green]
[Blue]
[Bracket-Red]
[Bracket-Black]
[Green]
We have professional service, if you have any questions when purchasing Digital Gear Indicator , please contact us in time. Please confirm if the Indicator Meter Display fits your motorcycle before placing an order, to make sure you get what you want and bring you a comfortable online shopping experience.
Shows current gear number
Indicates current gear from 1 to max of 6. as well as a neutral indicator.
Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.
Display can be mounted anywhere
Instructions Guide:
Find the BLACK, 4-pole diagnostic connector (also called as DDA) under the or under the fuel tank
Detach the cover (cap) from the and connect theGear Indicatorplug.
Route the cable to the mounting location along the frame.
Peel the green plastic off from the back of the unit, and mount the display.
Secure the cable with the cable ties supplied.
Set up:
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
Raise the rear wheel off the ground by using a stand, and start the engine in Neutral. (If you do not have a stand, you may setup the unit while riding. Find a long, straight road with light traffic.)
The display will blink "1".Select first gear, release the clutch, and keep the RPM above idle speed. The display is blinking faster while the unit is learning the gear.
When the display shows "2", select second gear.
Repeat this process until all gears are thought (5 or 6).
The unit is programmed and should indicate the gears correctly.
Now, when ignition is turned on, the display counts forward (1 to 6) indicating that it is fully functional.
With For DU&CATI Logo
Fitment:
For DU&CATI Hyper motard All (2008-2019)
For DU&CATI Hyper Strada All (2013-2019)
For DU&CATI Monster 696 (ALL Year)
For D