Feature
●【Easy to Use Construction Tool】RONGPRO laser level for picture hanging with one button operation makes it easy to select Horizontal or Vertical line for indoor or outdoor use. One button controls the laser lines, you could get any angles of the measurement target. Ideal for tile alignment, wall studding, windows, doors, etc.
●【Self Leveling Feature】If you are struggling to make laser beam level when you use it,which would waste your much time.This level laser tool could self leveling when located on an inclined surface within 4 °. If the surface inclines over 4 °, the laser will flash to indicate out-of-level condition to remind you to adjust the location of laser leveler tool, which is very easy to use and save your much precious time.
●【Multifunction Operation Modes】3 laser level line has two switching models:lock and unlock.Each of them has three measurement modes: vertical laser ,horizontal laser line,cross laser line.Switchable horizontal and vertical green beam laser tool could lock the vertical,horizontal and angle position of the measurement target quickly.
●【Green Level Laser With Visibility and High Precision】RONGPRO green laser level takes upgraded chip tech to deliver maximum line laser visibility up to 98ft with 2 times brighter than red lasers, meets indoor and outdoor projects totally. Whether DIY makers or professional worker, this line level with green laser could be one of the easiest tools for you to use, make your job easier.
●【Portable and Durable】RONGPRO Laser Level is small and compact, perfect for both famliy small DIY projects and extensive construction projects, and it has a freestanding mode for convenience. A soft-case is provided to keep the device clean and protected from tool-box debris.
Description
RONGPRO Self Leveling Laser Level
The laser tool is completely covered by high quality ABS, which delivers comfortable touch and stronger protection.
Adjust Visibility
Adjust the brightness by long pressing top button on the remote control(about 3 seconds), to meet your light requirements in different scenes.
Self-leveling Mode&Manual Mode
Once the pendulum unlocked, the self-leveling mode is enabled. The laser tool will beep when the tool is out of self-leveling range ±3°.
Move the side switch to "OFF" and hold down the top button (about 2 seconds), turn on the manual mode. The pendulum will be in the locked position and the laser tool can be placed at any Angle for use.
The effective distance of indoor laser is 98Ft, and the laser beam width is 5mm. Outside in direct sunlight, the effective distance will be shortened.