Spec:
Item Type: Dissolved Oxygen Meter
Material: ABS
Weight: Approx. 328g/11.6oz
Dissolved Oxygen Meter Size: Approx. 35 x 155mm/1.4 x 6.1in
Electrode Length: Approx. 150mm/5.9in
Cable Length: Approx. 1.1m/3.6ft
Measuring Range:
Dissolution: 0.0-40.0mg/L
Dissolved Oxygen Saturation: 0.0-300.0%
Temperature: 0.1-40.0℃; 32.0-104.0℉
Resolution:
Dissolution: 0.1mg/L
Dissolved Oxygen Saturation: 0.1%
Temperature: 0.1℃; 0.1℉
Accuracy:
Dissolution: ±1.5%F.S
Dissolved Oxygen Saturation: ±1.5%F.S
Temperature: ±0.5℃
Calibration Method: Support single-point or double-point automatic calibration, that is, 0 point or automatic 100% calibration in the air.
Response Time: ≤45s (90% Response at 20℃)
Automatic Temperature Compensation Range: 0-40℃
Battery Level: Low Battery Warning
Backlight: Support Automatic Backlight
Power Supply: Automatic Shutdown for About 8 Minutes
Battery Attributes: 3 x 1.5V 150MAH LR44 Battery (Battery Not Included)
Use Environment: 0.1-40.0℃ RH Maximum 90%
Instructions for Use:
1. Connect the electrodes, press the power button, power on, the screen will display mg/L temperature
2. Short press the HOLD button to lock the value, long press the TEMP button to switch ℃ or ℉
3. Short press the MODE button to switch mg/L or%
4. Long press the CAL button to calibrate in the air. The screen displays 100.0%. After the flashing is completed, the calibration is successful. If calibrated in anaerobic water, 0.0% is displayed.
packing list:
1 x Dissolved Oxygen Meter(Battery Not Included)
1 x Electrode
6 x Replaceable Electrode Tip
1 x Instruction
Note:
1. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
2. This product does not come with electrode filling fluid.