Feature

●GOOD QUALITY DIAMOND POLISHING KIT : DIAPICK TOOLS diamond polishing pads are made using good diamond powder, resin and ceramic. And each pad is doing its best to finish the product and inspect it. The end of the pad was also finished as neatly as possible. Flexible pads reduce material damage, and good quality resins and ceramics increase the lifespan of the pads. In addition, the good quality Avrasive powder shows gloss and quick polishing. To meet the above requirements, DIAPICK TOOLS
●Composition of Diamond Polising Kit: There are 9 PCS. It consists of a resin pad of 7 PCS, a backer pad with 5/8-11 threads of 1 PCS, and a drill connector for mounting to a drill of 5/8-11 of 1 PCS. The resin pad consists of grit 50, 100, 200, 400, 800, 1500, and 3000, which is the basic and optimal configuration for polishing the product. The method of installing the connector for the drill is described in the video. If it is mounted as the video, it will not be released during use.
●Instruments available: polisher, various speed control angle grinders, drills, sanders, etc. can be used, but the important thing is that the speed RPM should not exceed 5000. This is because the resin pad is attached to Velcro without being fully fixed, so it may be separated if used at high speed. In particular, since the angle grinder has a speed of more than 10,000 RPM, please use an angle grinder that can control various speeds.
●Instructions and Resin Pad Grit Use: Resin Pad Grit consists of 50,100,200,400,800,1500,3000. Resin pad grits 50 to 200 are used for grainding, decontamination and scratch remover. Depending on the depth of the scratch and the degree of contamination, it can be selected and used from grit 50 to 200. In general, it would be good to select and use grit number 50 or 100. Resin grit 400 to 3000 is the polishing stage. When polished sequentially, the surface hardness and gloss, smooth gradually increase.
●Wet or dry: This resin pad is available in two ways, wet or dry, but DIAPICK TOOLS recommends wet rather than dry. In particular, Grit 400 to 3000 is recommended for wet use. When the polished part dries, the gloss will be visible. DIAPIC TOOLS resin pads are suitable polishing and restoration for granite, marble, quartz, concrete, terrazzo,rock, glass, all kind of stone.


Description

DIAPICK TOOLS Diamond Polishing Pad

상세1상세1

Polishing pads

  • It is recommended to use diamond polishing pads to periodically manage stone materials such as marble.
  • They help remove dirt or scratches from stone or concrete surfaces and increase the hardness of the surface. In particular, scratches are the cause of contamination.
  • It is polished in two ways, wet and dry, but it is more efficient to use wet than dry. In particular, from Grit 400 to Grit 3000, you will see better results from wet work.
  • DIAPICK TOOLS Diamond Polising Pad Kit is the best product for polishing stone, concrete, and quartz.

pad gritpad grit

baker padbaker pad
Baker pad and Connecter

Diamond Polising Pad Kit includes one backer pad and drill connector.

  • The maximum RPM is 5000 because this product uses a Velcro backup pad. In particular, if a high-speed angle grinder is used, the diamond pad may be separated during use and there may be risks. Be sure to use angle grinders of various speeds.

  • 1PCS 5/8"-Thread Backer pad
  • 1PCS 5/8"-Thread Connector for Drill

Components of the Polising Pad

Components of the resin pad

7PCS sequential grit resin pads

  • 1PCS pad of 50 grit
  • 1PCS pad of 100 grit
  • 1PCS pad of 200 grit
  • 1PCS pad of 400 grit
  • 1PCS pad of 800 grit
  • 1PCS pad of 1500 grit
  • 1PCS pad of 3000 grit
wet or drywet or dry

wet polishingwet polishing

All types of stone, tile, glass, concrete, and terrazo are available.

This pad can be used wet or dry

Both wet and dry pads are available, but this pad recommends wet rather than dry

  • Can use both wet and dry, but wet is more efficient than dry.
  • Especially from #400 to #3000, have to use it wet to see better quality.

  • From grit 50 to grit 200, it is used to remove scratches and contamination. Depending on the degree of scratch or contamination, you can select from grit 50 to grit 200 and use it.
  • Grit 400 to Grit 3000 are in the polising stage.If you polish 400, 800, 1500, and 3000 sequentially, the floor surface gradually becomes smooth, glossy, and the floor surface becomes hard.
regin pad sizeregin pad size

Good quality Resin and Abrasive Powder

  • Good quality resin increase the lifespan of the pad.
  • Good quality abrasive powder show golss and quick polishing.

Installation order

installation orderinstallation order

install2install2

install 3install 3

install 4install 4

First, connect the drill-connected adapter to the backer pad

Second, install a connection adapter on the drill

Third, hold the head of the drill and tighten the connection adapter once more. The connection adapter and drill are not separated during polishing.

Finally, mount the diamond pad to the backer pad.

terazzoterazzo

Terrazo Polising

You can make terrazo using this pad.

terazzoterazzo

concrete poconcrete po

상판연마상판연마

대리석사진대리석사진

Whats in the box

  • ‎5/8’’-11 Backer Pad