Feature(may vary by option.)
●【 Foldable Stand 】 The J-shaped pole can be folded from multiple angles, with a total load of 150 pounds, and can accommodate 2 kayaks. The kayak roof stand makes it easy for your car to enter the parking lot and garage without the need for disassembly.
●【 4 S-hook rated ratchet belts and 4 ratchet belts】 Maximize the locking of your canoe, boat, SUP, snowboard, snowboard, and surfboard, making it convenient and safe to fully enjoy your vacation.
●【 Extra Large Knobs 】 There are 2 upgraded extra large knobs on each bracket, making it easier to adjust to the appropriate angle to fit kayaks of different sizes and shapes.
●【 Rubber pedal and foam protector】Foam liner and rubber bottom cover are made of real rubber and foam. They are non slip, waterproof, and sun proof.
●【 T-shaped anchor point 】 Provide connection points below the hood, luggage compartment, and hatch to secure the bow and stern of the ship with an S-shaped hook rated ratchet belt. If you have any questions, please feel free to contact us. Thank you.
[23-krf-2]
[23-krf-1]
Description
|
|
|
|
|---|---|---|
Suitable for various vehicle modelsWe suggest driving the car for a period of time, stopping at a suitable place to check if the bracket is loose due to bumps, and then retightening the nuts and tightening the straps before continuing driving. |
Please check the distance between the roof of the car bracketIt is recommended that the distance from the top to the bottom of the crossbar must be greater than or equal to 2 inches |
The finished product after correct installation can be stably fixed on the crossbarAfter installation, please check if the screws are tightened. After tightening, the bracket on the crossbar must not be loose. |
Quick Hood Loops Trunk Anchor
|
|
|
|
|
|---|---|---|---|
|
Find a suitable position under the engine hood and use it as an anchor point after covering. |
The position can be adjusted according to different types of cars, and can be used after fully covering the engine hood. |
Can be used in most areas under the engine hood as needed. |
As needed, it can be used in most areas under the luggage compartment lid. |
Introduction to First Use
When the product is delivered from the factory, the rigid locking joints on both sides are in the most relaxed state. If the rigid locking joints are rotating both sides when you tighten the knob, please push/hold one side of rigid locking joint and tighten the other side first.When the gear is fully closed, it is already in a locked state, and there is no need to tighten it again.
Multi angle adjustment
The J bar can be adjusted from multiple angles to lower the height of the roof to the lowest level, so that your car does not need to dismantle the rack when entering the garage.
The large rotation by hand saves effort,and the gear engagement type is not easy to slip.
|
|
|
|
|---|---|---|---|
| Folding kayak roof rackTwo boats | Folding kayak roof rack one boats | 2 pairs kayak roof rack | |
| Customer Reviews |
14
|
74
|
450
|
| Price | $86.85 | $59.85 | $63.75 |
| Material dimensions | 22mm Diameter Alloy Steel | 22mm Diameter Alloy Steel | 22mm Diameter Alloy Steel |
| Whether to fold | yes | yes | no |
| Number of ships carried | 1-2 Pack | 1 Pack | 1-2 Pack |
| Product packaging weight | 23.4LBS | 15.4LBS | 18.5LBS |