StepNpull is a foot-operated door opener that works on any latch-less commercial wood or metal door. Available in four stylish finishes. International shipping.
StepNpull is a low-cost and effective way to ensure your customers and staff have a contactless option when entering your establishment or exiting a restroom. Simply step and pull, its that easy!
StepNpull is an easy to install, foot-operated door opener that works on any commercial latch-less wood or metal door, and gives the user the option of pulling the door open with their foot instead of the door handle.
With StepNpull, the weight of the door is not a factor. If an interior door closer resistance is adjusted to the ADA standard of 5 pounds or less, then the user will be able to easily open the door with their foot using StepNpull.
|
|
|
|
---|---|---|---|
Installs in less than 5 minStepNpull should be mounted approximately 1/8" from the bottom and outer edge of the door. 1) Mark the holes with a pencil while holding the StepNpull against the door at a level mounting position. 2) Use a 5/16” bit to drill the center hole. 3) Use the sexted bolt for the middle hole. 4. Level the StepNpull. 5) Use the 1 ¼” screws for the outside holes. 6) Tighten sexted bolt. |
Easy to useSimply step down and pull, its that easy! Use your weight to step down, then pull back to open. This mirrors the common foot motion of taking a step. The StepNpull is installed directly below the handle allowing a hands-free way to open a door. |
Commercial Grade ConstructionStepNpull is made with extruded aluminum, NOT bent metal. The process of using extruded aluminum ensures longevity and durability of the product over time. It is also powder coated and comes with stainless steel mounting screws to prevent rusting and wear. |
Trusted by Leading BrandsStepNpull is the original hands-free door opener and we have been in operation since 2007. Through this experience, we have perfected our product and it has been installed on hundreds of thousands of doors around the world. |