Feature(may vary by option.)

●Use our 3 Way, T shaped glass shelf connectors to easily add an adjustable height glass shelf to your 3/16" thick tempered glass cubes or cubbies.
●To install, place 4 connectors at the same height onto the tempered glass & slide the additional shelf into the open slot of the connectors. Then tighten the remaining 4 screws to secure the shelf.
●The connectors are made out of a heavy duty metal & come in a chrome finish. The screws are made out of sturdy, non marring plastic that will hold your tempered glass in place but will not scratch it.
●Use a Flathead screw driver to tighten the connector onto the glass. Note: 4 connectors are needed for each shelf. The open slot of the connectors must face towards the inside of the cube display.
●This listing is ONLY for [24] 3-way Add-a-shelf connectors. Please note, NO tempered glass panels are included.

[24 Pack]





Description

Use our 3 Way, T-shaped glass shelf connectors to quickly and easily add a custom adjustable height glass shelf to your 3/16" thick tempered glass cubes or cubbies display. These connectors are easy to install and remove and provide a tight grip. They are high quality as they are made from heavy-duty metal. They will not damage the glass as they have plastic screws that screw into the glass. These connectors are easy to slip on and off as needed to adjust the attached glass shelf. Using these connectors is more economical than getting holes drilled in your glass. Use a set of 4 of these connectors to add one glass shelf to your existing display. They are available in multiple pack sizes.

bracket shelf gripbracket shelf grip

Easy and quick to install and remove

The connectors are easy to install and remove. Simply place 4 connectors at the same height as each other and attach to the tempered glass. Then slide the additional shelf into the open slot of the connectors. Tighten the remaining 4 screws to secure the shelf. Make sure to use a Flathead screw driver to tighten the connector onto the glass. Note: 4 connectors are needed for each shelf. The open slot of the connectors must face towards the inside of the cube display.

not damage glassnot damage glass

Will not damage glass

The screws that hold the pieces of glass together are made out of sturdy, non marring plastic that will hold your tempered glass in place but will not scratch it.

cheaper safecheaper safe

Cheaper and safer than drilling holes in glass

Avoid getting holes drilled and avoid risking glass breakage with these connectors. These connectors will not cause any damage and will not cause chips in the glass like drilling holes can. They are also a great solution as they are removable so you can easily move your shelf up and down which you cant do if you permanently drill holes in your glass.