Feature(may vary by option.)
●【Product parameters】Rated speed: 0-27RPM; Reduction ratio: 1:50(50K); Power Phase: single-phase; Shaft diameter: 12mm/0.47in; Geared motor size: 164mm * 90mm *74mm/6.45*3.54*2.9in; Reducer size: 61*90*74mm/2.4*3.54*2.9in.
●【High Quality】This is a 90W AC 110V gear motor, rated speed: 0-27RPM. it consists of cast aluminum housing and carbon steel gears with special treatment for long service life.The machine is clearly marked with numbers and letters to make your operation easier and more convenient.
●【Stable operation】 Our 90W gearbox consists of motor and reducer. With 21nm high torque, you can freely adjust different speeds according to different products, improve working efficiency.
●【Widely applied】It can be widely used in packaging industry, printing industry, construction, machine tool industry, barbecue industry, etc. Suitable for advertising, office, sports equipment, instrumentation, automatic warehouse, parking and other equipment.
[90w]
[250w]
[60w]
Description
Product parameters
Rated voltage: 110V
Rated speed: 0-27RPM
Reduction ratio: 1:50（50K）
Torque: 21nm
Power Phase: single-phase
Shaft diameter：12mm/0.47in
geared motor size：164mm * 90mm *74mm/6.45*3.54*2.9in
Reducer size: 61*90*74mm/2.4*3.54*2.9in
Packing list:
1 x motor
1 x reducer
1 x speed controller
Notes:
In order to reduce the inapplicability of the motor, please judge according to the selection process before placing the order
1.Judge the deceleration range first
1) The speed is within the safe speed range (e.g. 315-450r), choose the wattage according to your actual load
2)The speed is outside the safe range (such as 100-450r), choose 2-3 times of your actual load（For example, if you want to choose 100-450R 15W motor, now you need to choose 30-45w motor）
2.Judge load
1) Load product ＜1m，If the torque is 10nm, the load is generally ≤ 10kg
2) Load product ＞ 1m, please consult us
3.Continuous working time of motor
1) Continuous working time of motor＞4h, Wattage selection needs to be increased (For example: if you want the motor to Continuous work 5h, you need to choose lager watts than your actual load watts)
2)Continuous working time of motor＜4h, Wattage selection no needs to be increased
4.Judge the installation form (2 kinds in general)
1) Directly use the output shaft to drive the load [that is, the load is directly forced on the shaft, which is generally judged by comparing the data in the table, and the difference is not big]
2)Second, Motor as a power source to drive a whole equipment [there are many accessories, such as roller, pole, etc.], which we usually need to match 1-2 times larger. (For example, if you choose the second installation way, you want 15W motor first,now you need to choose 30-45W product.)