Steps for Cutting Bottles:
1. Install the bracket and screws;
2. Rotate bottle to make a score line;
3. Place 2 rubber rings on both side of the score line;
4. Pour boiling water over the score line;
5. Then switch to pour cold water immediately;(If the bottle doesn’t separate, please repeat to pour boiling water and cold water alternately.)
6. Clean the bottle and smooth the edge.
Tips:
1. To ensure the best performance from your bottle cutter, please read the Instruction Guide before using the glass bottle cutter;
2. To avoid injury, wear gloves before use the glass bottle cutter;
3. Make sure that both hands rotate the bottle at the same time to get a flat line while cutting and not letting the boiling water overflow between the two rubbers band while pouring(The optimal distance between the two rubber rings is less than 1CM) Otherwise the edge of the bottle may not be so flat.