Feature

●Wide Voltage Input: 3.3~5.5V; Output Voltage: 0 ~ 2.3V
●Analog signal output, compatible with most of 5V or 3.3V Arduino controllers
●AC Excitation Source, effectively prevent probe from polarization
●Plug and play, easy to use, you can build a TDS detector easily to measure the TDS value of liquid.
●It can be used in water quality application, such as domestic water, hydroponics. So you can easily DIY a TDS detector to reflect the cleanliness of water to protect your health.


Description

Specifications:
Input Voltage: 3.3 ~ 5.5V
Output Voltage: 0 ~ 2.3V
Working Current: 3 ~ 6mA
TDS Measurement Range: 0 ~ 1000ppm
TDS Measurement Accuracy: ± 10% F.S. (25 ℃)
Module Size: 42 * 32mm
Module Interface: PH2.0-3P
Electrode Interface: XH2.54-2P
Description:
This is a TDS sensor/Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. It can be applied to domestic water, hydroponic and other fields of water quality testing. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
TDS (Total Dissolved Solids) indicates that how many milligrams of soluble solids dissolved in one liter of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the water is. Therefore, the TDS value can be used as one of the references for reflecting the cleanliness of water.
This product supports 3.3-5.5V wide voltage input, and 0-2.3V analog voltage output, which makes it compatible with 5V or 3.3V control system or board. The excitation source is AC signal, which can effectively prevent the probe from polarization and prolong the life of the probe, meanwhile, increase the stability of the output signal. The TDS probe is waterproof, it can be immersed in water for long time measurement.
Attention:
1.The probe can not be used in water above 55 degrees centigrade.
2.The probe can not be left too close to the edge of the container, otherwise it will affect the reading.
3.The head and the cable of the probe are waterproof, but the connector and the signal transmitter board are not waterproof. Please be careful.
Package included:
1 x Analog TDS Sensor Meter
1 x TDS Probe
1 x PH2.0-3P Wire