Feature(may vary by option.)
●Flow Rate: 1100GPH; Volt: 12V; Current: 3.8A; Head: 4.0M.
●Wire Lead: 1m; Outlet Diameter: 29 mm/(1-1/8")Inch; Width: Approx. 81mm.
●Built-in float switch! (No separate float switch is needed).
●No power use until pump is activated by internal float switch (when water level rises).
●Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
[1100GPH 12V Model 2]
[1100GPH 12V Model 1]
Description
ECO-WORTHY Automatic Submersible Boat Bilge Water Pump
High flow is up to 1100 GPH, 12 Vlot, 9.8FT Lift up, 39 Inch Wire length.
All-in-one pump & switch - No separate float switch is required.
Snap-lock strainer bases, easy to be opend and cleaned.
Sealed marine bilge pump , can totally submersible and has ignition protection function.
|
|
|
|
|---|---|---|
Intelligent Floating MovementWhen there is no water or the water level is low, the float switch is in a downward state, and the drainage work is closed. |
Intelligent Automatic DrainageWhen the water level gradually rises, exceeds the critical point, the float switch floats up and the drainage work starts. |
Simple & PortableSmall pump designed with snap-lock bases, larger filter prevent clogging, detachabled with one hand, easy facilitate cleaning. |
|
|
|
|
|---|---|---|
1-1/8" Drainage OutletThe bilge pump is equipped with a 1-1/8" drainage outlet, the drainage flow is up to 1100 GPM, effectively saving your time. |
Automatic ModeThe black wire connects to the negative pole. The brown-white wire connects to the positive pole. |
Manual ModeThe black wire connects to the negative pole. The brown wire connects to the positive pole. |
Manual Repair Bilge Pump Steps
Dont worry! If the float switch doesnt work or works abnormally , its probably just stuck on something, repair the fault according to the above steps.