Feature

●INCREASE CLUB BUILDING EFFICIENCY - The fast and efficient way of installing plastic golf ferrules onto steel and graphite golf shafts
●EASY TO USE - Start the ferrule onto the shaft and place the ferrule into the recessed hole for golf ferrule to sit. Push down for the shaft to pass through the ferrule. Then you can use the head to seat the ferrule to the final position.
●COMBINATION MEASURING TOOL - Measures popular shaft tip diameters (0.335”, 0.350”, 0.355” taper tip and 0.370”) and shaft butt diameters (0.560”, 0.580”, 0.600” and 0.620”) for quick identification
●INDISPENSABLE TOOL - Will become a mainstay on any clubmakers workbench
●ALUMINUM CONSTRUCTION AND COMPACT – Measures 1.5” tall, 1.5” high and 1.5” long


Description

Installing a ferrule onto a golf shaft with Hirekos The Ferrule BlockInstalling a ferrule onto a golf shaft with Hirekos The Ferrule Block
installing a golf ferrule onto a steel shaft with the Hireko Ferrule Blockinstalling a golf ferrule onto a steel shaft with the Hireko Ferrule Block

Golf Ferrule Installation Tool

This golf club repair tool is the easy way to install golf ferrules 3/4" onto a steel or graphite shaft. Allows for adding lead or brass tip pins for swingweighting. Then use the club head to drive the ferrule to it final position.

The top of The Ferrule Block features a counter-bored recess for the ferrule to sit without slipping and will accept all standard sized ferrules from 0.335” to oversized 0.370” iron ferrules. Once you have started the ferrule onto your golf shaft, simply push down until the shaft is seated into The Ferrule Block.

Hirekos The Ferrule Block, measurements for the tip diameters (0.335", 0.350", 0.355"T and 0.370")Hirekos The Ferrule Block, measurements for the tip diameters (0.335", 0.350", 0.355"T and 0.370")

More than a fast and efficient way of installing golf club ferrules onto graphite and steel golf shafts

This combination clubmaking tool also measures popular shaft tip diameters (.335”, .350”, .355” taper tip and .370”) as a quick way to identify them. This will become a permanent fixture on any golf club builders workbench.

Hirekos The Ferrule Block, measurements for the butt diameters (0.560", 0.580", 0.600" and 0.620")Hirekos The Ferrule Block, measurements for the butt diameters (0.560", 0.580", 0.600" and 0.620")

Useful for re-gripping a golf club

On the opposite side of The Ferrule Block, you can measure shaft butt diameters (.560”, .580”, .600” and .620”) for quick identification. This is extremely helpful for grip sizing and knowing what grip core size to purchase.

Dynacraft Blade Style Grip Remover Dynacraft Bench Ruler Soleplate and 48 inch aluminum ruler kit Dynacraft 26-piece Golf Re-Gripping Kit- Includes Grip Tape, Solvent, Vise Clamp, Utility Knife Dynacraft Golf Grip Solvent - 32 Ounces Bottle Bundle with Trigger Sprayer Dynacraft Professional Double Sided Grip Tape (2" x 36 yards) Dynacraft Fast Setting Golf Club Epoxy (16-ounce kit)
Dynacraft Blade Style Golf Grip Removal Tool Dynacraft Bench Ruler Soleplate Kit Dynacraft 26-piece Complete Golf Re-Gripping Kit - Regrips 15 Golf Clubs Dynacraft Golf Grip Solvent - 32 Ounces Bottle Bundle with Trigger Sprayer Dynacraft Professional Double-Sided Golf Grip Tape Dynacraft Fast Setting Golf Club Epoxy (16-ounce kit)
Other great Dynacraft club building tools and supplies The offset handle and sturdy blade make quick work along with a little solvent to manually remove golf grips. This is a much safer alternative on how to remove golf grips as there are no needles to worry about to safely remove grips. The Dynacraft Bench Ruler Soleplate Kit works in unison with a standard 48” aluminum ruler (included) to measure club length without having to set the club in the playing position. Measures both RH and LH golf clubs and works for all clubs. 26-piece re-gripping kit includes: 15 strips of 2" double-sided grip tape- 4 oz bottle of grip solvent- rubber vise clamp - Utility knife - 2 Heavy duty straight blades - 5 Hooked Knife blades - Instruction sheet Non-Toxic, Non-Flammable, Low Odor formula is much safer than store-bought solvents. This grip solvent is reusable; excess can be strained and poured back into the bottle. Sprayer is more efficient by creating less waste and clean-up. Dynacraft Professional Double-Sided Grip Tape is the industry standard tape for installing slip-on golf grips. This 2” wide x 36-yard roll is sticky on both sides, applied lengthwise on the shaft and activated with solvent. The Dynacraft Fast Setting Golf Club Epoxy beats any tour van epoxy we have tested in strength. Works on all club head and shaft materials and is great for all golf club repair. You can hit golf balls in 30 minutes.

Product information