How is it used?
1, Remove the interfering object from the tire with the supplied heavy duty calipers.
2, Use the torsion drilling tool to enlarge the holes.
3, Use pliers to remove a repair cable from the plastic side.
4, thread the repair cable through the eyelet of the insertion tool.
5, use the insertion tool to insert the cable into the hole, leaving visible 1/2 inch of the cable ends
6. Slide the mounting platform until it touches the tyre. Hold the support platform against the tire by lifting the T-handle quickly and firmly leaving the pin in place.
7, Use the supplied knife to cut the excess material of the cap and inflate the rubber to the recommended pressure.