Feature
●【FAST & PERFECT FLARING】 - Our Electric Flaring Tool can fast and perfect flaring to a standard 45° HAVC pipes. You dont have to take the time and effort to finish rough, non-standard pipes with manual pipe flaring tools.
●【5 Sizes Patented Pipe Limit Clamps】 - Our power Electric Flaring Tool Kit come with 5 sizes pipe limit clamp suitable for a wider range of pipe sizes. Sizes include 5 SAE Standard (1/4", 3/8", 1/2", 5/8", 3/4"). The Pipe Limit Piece on the clamps allow for perfect alignment when placing pipes, making it easy for you to complete delicate work.
●【MORE POWERFUL BATTERY】 - Our Electric Flaring Tool Kit has a more powerful battery with a capacity of up to 2200 mAh, which can flaring 5/8" pipe 135 times on a full charge. Working voltage 11.1V, charger output voltage DC 12V, output current 1.5A, input power 22W.
●【Titanium Flaring Bit & High Torque Copper Motor】 - Flaring bit for the electric flaring tools HAVC are titanium plated and eccentric for extreme durability. The motor of the electric pipe flaring tool is made of full copper and has high torque, so it has strong power to flaring into perfect pipes.
●【Package Includes】 - Electric Flaring Tool Body, 5* Limit Clamps, 2200 mAh Battery, Charger, U.S. Standards Plug Adapter, Deburrer, Wrench, Instruction, Carrying case.
●【US Plug Adapter】 - The package included a U.S. standards plug adapter.
●MAINTENANCE - 1. Often clean the pointed head of copper debris with a brush; 2. Drop oil to lubricate the turning part of handle.
Description
Electric Flaring Tool Kit
Our Electric Flaring Tool can fast and perfect flaring to a standard 45° HAVC pipes. You dont have to take the time and effort to finish rough, non-standard pipes with manual pipe flaring tools.
MORE POWERFUL BATTERY
Our Electric Flaring Tool comes with a rechargeable lithium battery with a capacity of 2200 mAh (about 5/8" copper 135 time at full power) and a charger.
Working voltage 11.1 V, charger output voltage DC 12 V, output current 1.5 A, input power 22 W.
Charging indicator lamp: Displaying the charging status of the battery pack.
5 Sizes Pipe Limit Clamp
5 SAE Sizes - 1/4", 3/8", 1/2", 5/8", 3/4"
- Lighting Lamp: For auxiliary lighting, initially turned off state.
- Lighting Switch: Long press the "Lighting Switch" button for more than 3 seconds to light.
- Power Level Indicator Lamp: It is divided into 100%, 75%, 50%, 25% Four-grid green prompt light. "100%" all on; "75%" three-grid light"; "50%" two-grid light; "25%" one-grid light"; The 25% " single grid is light and flashing at low power, the operation cannot be conducted at this time, which needs to be used after charging.
- Fault Lamp: Displaying the fault status (the first indicator on the left). According to the number of times the fault light on, light off and flashes, you can initially determine the fault. Please operate correctly according to the fault indicated in the manual.
|
|
|
|
|
|---|---|---|---|
All Copper Powerful Motor |
Start Button |
With Lanyard Design |
Deburrer & Wrench |
ATTENTION
- Do not put the clamp without copper pipe into the machine, which may cause damage to the clamp and the machine;
- It is forbidden to open the wrench during operation to prevent the machine from getting stuck;
- If the start switch is triggered by mistake in non-working state, the machine will reset automatically;
- If adjust the locking structure excessively, It will be difficult to press the handle. Please adjust the outer hexagon eccentric shaft in the opposite direction until the handle is pressed normally;
- If the electric flaring tool does not work, please refer to the manual to restore the operation. If other problems occur, please feel free to contact through Amazon.