Feature(may vary by option.)

●Flaring tools make flares with the ideal dimensions for a perfect packing, due to a wider area of contact between the flare surface and the valve/tube accessory
●High-temperature method preserves malleability, preventing cracks and leaks
●5PC set with the most common HVAC tubing diameters, including 3/4" 5/8" 1/2" 3/8" and 1/4" flaring drill bit
●For use with power drill and screwdriver on soft copper
●1/4 inch hex shank for quick release to improve your work efficiency

[5-in-1 Flaring Tool]




[6PC Flaring Tool]




[5PC Flaring Tool]





Description

flaring tool setflaring tool set

Hex Shank Flaring Drill Bit Set

Designed to work with 3-jaw power drills or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills.

Finish the Flaring in Seconds

FASTEN the Flaring SPIN Tool FASTEN the Flaring SPIN Tool

INSERT the Flaring SPININSERT the Flaring SPIN

PULL OUT the Flaring SPINPULL OUT the Flaring SPIN

Fasten the flaring drill bit into the drill chuck. Ensure it’s on tight. Firmly hold the tube at all times. Use your other hand if needed. Important: Use rotary mode only. Hammer/impact mode will damage the tube.

Please keep the drill at maximum speed at all times. Align the tube and drill. Insert the flaring drill bit. Maintain constant pressure throughout the process until the tool stopper has met with the tube.

Pull out the flaring drill bit from the tube. NOTICE: The flaring process is an “in-and-out” sequel that is approximately 5 to 7 seconds.

Wide Range of Uses

Home Air Conditioner RepairHome Air Conditioner Repair

Home Refrigerator RepairHome Refrigerator Repair

Refrigeration Equipment ManufacturingRefrigeration Equipment Manufacturing

Refrigeration Equipment RepairRefrigeration Equipment Repair

Home Air Conditioner Repair

Home Refrigerator Repair

Refrigeration Equipment Manufacturing

Refrigeration Equipment Repair

The 5PC flaring drill bits are an innovative toolset, which provides a high-temperature, leakage-free flaring method, designed for the most common tubing diameters in HVAC systems.

The high-temperature method preserves the coppers/aluminums malleability while performing the flare, preventing cracks and leaks. The tools were developed and are recommended for soft copper.

The drill bit set makes flares with the ideal dimensions for a perfect packing, due to a wider area of contact between the flare surface and the valve/tube accessory.

To top that, you can make flares with the bits in just 5 seconds!

To perform the flaring in copper/aluminum tubing, simply attach the corresponding tool size to a drill. Because they perform their job using high temperature and friction, no clamping tools or holders are necessary.

In addition, the bits are equipped with a 1/4 inch hex shank, which allows quick release and will largely improve your work efficiency.

Flaring tool set 6pc swaging tool set
5PC Flaring Tool Set 6PC Swaging Tool Set
Customer Reviews
4.1 out of 5 stars
73
4.1 out of 5 stars
73
Price $14.89 $14.99
Shank Type 1/4" Hex Shank 1/4" Hex Shank
Usage Swag copper Pipe Flare copper pipe