OPERATION TIPS
- Q1:Why cant the detector detect anything?
The reasons why nothing can be detected may but are not limited to the following problems:
1.Sweep the search coil too fast.
2.The search coil is not parallel with the ground.
3.The wire was not successfully connected.
4.The target range is eliminated when setting DISC.
5.The sensitivity set too low.
- Q2:What should I do if the metal detector keeps beeping?
1.It is not recommended to test indoors. Metal in the building will interfere with the detection signal and beep continuously.
2.Not recommended for use in highly mineralized areas. For this, you can try to reduce the sensitivity and increase the height between the search coil and the ground.
3.In areas with more metal debris, you can use the DISC mode to select the target you want.
- Q3:What type of battery does this use?
1.The metal detector requires two 9V batteries to operate. Please note that this kit does not contain batteries.