Whats in the box:

• CSE-H55N2 Body only (a power adapter is required)

CSE-H55N2 is an industrial Serial to Ethernet converter that converts data received from RS422/RS485 interface to TCP/UDP packet and vice versa.

APPLICATIONS:

- Connect two serial devices through LAN or Internet (known as Serial Tunneling feature)

- Connect a serial device to a serial software on PC through LAN or Internet

- Connect a serial device to a TCP/UDP software on PC through LAN or Internet

FEATURES:

- Separator settings for packet fragmentation

- Protocols: IPv4 / IPv6 dual stack, TCP, UDP, Telnet, ICMP, ARP / DHCP, PPPoE, DNS, DDNS, ICMPv6 / TCPv6 / UDPv6

- Telnet COM Port Control Option (RFC 2217)

- SSL (Secure Sockets Layer)

- MAC/IP filtering

- Industrial temperature range (-40℃ ~ +85℃)

- Reverse voltage/ Over current/ Surge protection

- Hardware design to improve stability again noise and electrical damage

- Virtual COM port (ezVSP) provided

SERIAL INTERFACE:

- Connector: 3.5mm Pitch Terminal Block

- RS422: TX+, TX-, RX+, RX-, GND with embedded 3.9K biasing resistors and TVS

- RS485: TRX+, TRX-, GND with embedded 3.9K biasing resistors and TVS

- Baudrate: 300bps ~ 230,400bps

- Data Bits: 8 bits, 7 bits

- Parity: None, Even, Odd, Mark, Space

- Stop Bit: 1, 1.5, 2

NETWORK INTERFACE:

- 10Base-T/100Base-TX Ethernet (RJ45)

- Ethernet Speed Auto Sense

- 1:1 or Cross-over Cable Auto Sense