Wireless Vibration Alarm triggered by vibration, Not Only Suitable for Bikes, Motorcycles, Vehicle, But Also Designed for Home, Single Apartment, Rental Housing, Office, Hotel, Shop, Mall, Residential House or Anything You Wish to Protect, Deterring Thieves Effectively by 110db Loud Alarm (please know this vibration alarm does not need magnetic sensor part because its NOT a magnetic alarm its a vibration alarm).
Not Just a Vibrating Alarm, But Also Provides Emergency Help - SOS
When You Get This Wireless Alarm, You Can ......
DETERRING THIEVES: Easy to Figure Out. Has Loud Siren When Car Is Bumped into or Attempted Theft
WIRELESS VEHICLE SEARCH: Use the Emergency Function, 82 Ft Wireless Remote Control Range, Easily Find Your Car
EMERGENCY CALL FOR HELP: In Emergency, Press [Panic] Button On the Remote Control, The Alarm Will Sound 110dB
Remote battery installation:
When remote control range become shorter or LED light becomes fade,please replace the battery. Use minus(-) type of screwdriver to open the external cover, replace 1 new12V/27A alkaline battery. Caution:Ensure correct battery (+) and (-)orientation.
Host battery installation:
Slide on battery cover and install 2 AAA alkaline battery. The host produces a short “Bi” sound after the batteries are fully installed and also indicates the installation is successful.Use alkaline battery has abetter performance compare to othertypes of battery. Use other types of battery may cause shorter batterylifespan or lower alarm sound level.
For normal or electric motorcycle installation: Install the host at hiding location along with adhesive tape. Cautious: Away from any water all the times (Recommend:Install beneath the sitter, depends on actual condition to avoid loss and water.
Door/Window installation guides : Clean up he wall surface of the door/window, remove hosts adhesive tape liner and paste to the desired location to detect vibration at the door/window to prevent any theft penetration.
Cautions:
● Must pay Attention on installation method and free from water.
● Host alarm sound level may reduces at hiding place.
● Do not install the host at surrounded with metal place to avoid wireless signal become weak and affects to remote control range.
Press remote control LOCK key in standby mode,The main device produces 3 times “Bi Bi Bi” sound when enters into the Arm mode; One“Bi” sound after 3 seconds to enter alert mode and LED flashes at once every 3 seconds. (In order to minimize false alarm errors, requiresfew seconds to calm down and reset the transmitter in alert mode. Otherwise, any vibration would not trigger the alarm.)
Press remote control UNLOCK key to the Disarm at the Arm mode,the host will produces a long “ Bi… …” sound and exit the Arm mode. The host will in an idle condition except low power indication function.
Alarm Triggering
The host’ s alarm at the Arm mode will be triggered for 2 seconds.The host’ s alarm will be triggered again when detect any vibration within 2~12 seconds for continuous Direct press the Disarm key at remote control to stop the host from alarming and exit the Arm mode simultaneously.
Operating Environment:
The host uses 2 AAA size alkaline battery. The rectangle shape remote control uses one 12V/27A alkaline battery.The car-shape remote control uses one CR2032 button battery. Both host and rectangle shape remote control can operates more than 1 year in standby mode continuously. (Assume 5 times usage/day) The car-shape remote control can operates more than 4 years in standby mode continuously. (Assume 5 times usage/day)Operating environment temperatures: -10~+60℃ Operating environment humidity:R/H<80%. Storage temperature: -20℃~+70℃
Packing list:
1 x host(battery not included) ,1 x remote(battery included) ,1 x user manual.