Feature(may vary by option.)
●The concept of these Wedge and Feather Shims is that they split rocks by applying pressure from the inside out.These wedges are small but can exert amazing power,Extremely hard, heavy duty, industrial grade wedge and washer set.
●Simply pre-drill about 6-10 cm with a hammer and a 18mm drill bit, put the Stone Splitter in the holes and hit them, do not hit them with force, but push them forward steadily in turn. Used to cut the hard stone, rock, granite, marble, to split concrete.
●Size: Wedge Length(105mm), Washer Length(60mm), Hole Size(Diameter 18mm, Length 76-101cm), One set includes a rubber ring, a wedge and two washers (Good splitting tool).
●Caution: All springs and wedges work best when the holes for each are evenly spaced and drilled to the same depth. This will give you the cleanest, most precise break.
●Please take the necessary protective measures and wear eye protection when using this tool. If the stone threatens to split, please be careful.
[10 SET]
Description
Caution: All springs and wedges work best when the holes for each are evenly spaced and drilled to the same depth. This will give you the cleanest, most precise break.
- The concept of these stone wedge is that they split stones by applying pressure from the inside out. Used to split the hard stone, rock, granite, marble, concrete.
- Wedge and Feather Shims are a very effective way to split rocks, whether you need a precise cut or just want to reduce the size of a boulder to make it easier to handle.
specification
- Material: The Wedge and Feather Shims have high hardness and toughness, sturdy and durable.
- Stone Chip: 5/8" (16mm); Length: 4" (105mm);
- Fit a 5/8" diameter hole.
- Package quantity: 8 sets wedge and washers
- Each set includes: 1x rubber ring + 1x wedge + 2x washers
How to use:
1. Center wedge + 2 wedges.
2. Remove the remaining powder of the hole by using special drill holes
3. Turn the large side of 2 wedges (flat to flat) upside down and insert into the hole.
4. Flip the small side of the center wedge between 2 wedges and finally use the hammer splitting stone
5. The dividing line can be straight or curved.
6. Hit the wedges one at a time, firmly but not forcefully. Wait a few minutes and repeat the process until the stone is split.
Note:
- Please take the necessary protective measures before use
- Be alert if the rock is about to splinter.