Feature

●Package included: 20 packs LED Valve Bike Lights: 4 x Red, 4 x Yellow, 4 x Blue, 4 x Green, 4 x Colorful
●More energy-efficient with light & motion sensors
●Auto shining, No switch, 100% waterproof, fits for Presta & Schrader valve.
●Please kindly note there is a piece of paper in the battery case that needs to be removed before use. Sometimes it still not work when you remove the paper, then you need to put them on the valve stem and ride, they will light up.
●Batteries: Requires 3 x AG10 button batteries per light (included)


Description

20 PCS of Led Flash Tyre Wheel Valve Cap Light for Car Bike Bicycle Motorbicycle20 PCS of Led Flash Tyre Wheel Valve Cap Light for Car Bike Bicycle Motorbicycle

20 PCS of Led Flash Tyre Wheel Valve Cap Light for Car Bike Bicycle Motorbicycle Wheel Light Tire (4 Red, 4 Yellow, 4 Blue, 4 Green, 4 Colorful)

  • These LED Bike Wheel Lights are easy to install and remove; they fit most bicycles, motorcycles and cars.
  • LED Bike Wheel Light features motion sensors, LEDs and replaceable batteries.
  • The light will be off when the vehicle stops, on when it runs, and flash when you’re driving at night.
  • Screws onto the valve stem of your car, bicycle or motorcycle in seconds.
  • Package included: 20 packs LED Valve Bike Lights: 4 x Red, 4 x Yellow, 4 x Blue, 4 x Green, 4 x Colorful

Colorful LightColorful Light

Colorful Tire Led Lights

Specification:

Color:Colorful

Size: Approx. 6.3 x 1.8 x 1.8cm/ 2.5 x 0.7 x 0.7 inch (LxWxH)

Type:Tire Led Lights

Batteries: 3x AG10 Button Batteries(included)

Waterproof: IP68

Led Flash Tyre Wheel Valve Cap Light for Car Bike Bicycle Motorbicycle Wheel Light Tire

Red LightRed Light

Blue LightBlue Light

Green LightGreen Light

Yellow LightYellow Light

Red Tire Led Lights

Specification:

Color:Red

Size: Approx. 6.3 x 1.8 x 1.8cm/ 2.5 x 0.7 x 0.7 inch (LxWxH)

Type:Tire Led Lights

Batteries: 3x AG10 Button Batteries(included)

Waterproof: IP68

Blue Tire Led Lights

Specification:

Color:Blue

Size: Approx. 6.3 x 1.8 x 1.8cm/ 2.5 x 0.7 x 0.7 inch (LxWxH)

Type:Tire Led Lights

Batteries: 3x AG10 Button Batteries(included)

Waterproof: IP68

Green Tire Led Lights

Specification:

Color:Green

Size: Approx. 6.3 x 1.8 x 1.8cm/ 2.5 x 0.7 x 0.7 inch (LxWxH)

Type:Tire Led Lights

Batteries: 3x AG10 Button Batteries(included)

Waterproof: IP68

Yellow Tire Led Lights

Specification:

Color:Yellow

Size: Approx. 6.3 x 1.8 x 1.8cm/ 2.5 x 0.7 x 0.7 inch (LxWxH)

Type:Tire Led Lights

Batteries: 3x AG10 Button Batteries(included)

Waterproof: IP68

Applicable Valve Type:

USUS

UKUK

FRAFRA

US Valve Type

Applicable US Valve Type.

Suitable for American valve and English valve cars, French valve unavailable.

Suitable for bike, bicycle, motorcycle car, trcycle, golf cart tire, etc...

UK Valve Type

Applicable UK Valve Type.

Suitable for American valve and English valve cars, French valve unavailable.

Suitable for bike, bicycle, motorcycle car, trcycle, golf cart tire, etc...

FR Valve Type

Not Applicable FR Valve Type.

Suitable for American valve and English valve cars, French valve unavailable.

Suitable for bike, bicycle, motorcycle car, trcycle, golf cart tire, etc...

Installation Steps:

Installation Steps: 1Installation Steps: 1

Installation Steps: 2Installation Steps: 2

Installation Steps: 3Installation Steps: 3

Installation Steps: 4Installation Steps: 4

Installation Steps: 1

Unscrew the product

Installation Steps: 2

Remove the gasket inside

Installation Steps: 3

Installation Led Wheel Light to the bike Valve.

Installation Steps: 4

Installation finish.

It will light up when your car/bike/truck is driving or vibrating.

Attention:

1. please make sure the positive and negative poles when installing, the end with no word facing the spring.

2.Be sure to put the battery in the black insulating case inside, do not expose it, otherwise the battery and the metal of the lamp will cause the short circuit ,the battery will be dead in a few minutes.

3: Be careful when screwing the lamp head. Make sure that the metal strip on the side of the lamp head is in good contact with the metal base (if the metal is too close to the inside, you can manually pull it out, but must be gentle)

4: If the lamp does not light under normal conditions, you can adjust the length of the spring to ensure full contact with the battery (not too hard, it is easy to cause the spring to fall off), if it still do not light up please change the battery to try.

Product information