FAQ
Q: How to regeneration the unit?
A:
1. Disconnect the hoses connected to the unit and remove the head.
3. Fill the tank with 2 x 26oz table salt.
4. Return the head and connect the water source to the input.
5. Flush the unit for 30 minutes by turning on the water slowly.
6. Increase the water flow for 10 minutes until the salt is fully dissolved.
7. The unit is ready for use if the saltwater is completely drained from the unit.
Q: How to storage the water softener?
A:
1. Backflush the unit.
2. Regenerate the unit.
3. Put the unit upside down to drain the unit. Make sure the unit is dry.
4. Backflush and regenerate the unit again before reusing.